*mynauticexpo

M-BP40

Product catalog summary

Standard Design: The Balanced Proportioner M-BP40 is designed with specific materials and interfaces to ensure compatibility and performance. The standard materials include BS 1400 LG2, with options for BS 1400 AB2, AISI 316, Titanium Gr2, and 6Mo.

Interfaces: The water supply interface is DN 100 PN 16 or 4” ANSI 16.5 150 lb, with special designs available for other interfaces. The foam supply interface is 1 ½” BSPP Female, with options for adaptors for any thread or flange, and a 1 ½” SAE 3000 psi interface.

Pressure and Flow Specifications: The design pressure is 20 bar, with a test pressure of 30 bar. The flow range at maximum ΔP 2 bar is 530 – 5300 l/min, with options for 190-1900 l/min and 650-6500 l/min. The water pressure range is 5-19 bar, while the foam pressure range is 1-10 bar higher than the water pressure, limited to 20 bar.

Insertion Rate: Standard insertion rates are 1% and 3%, with tolerances of 0% to +30%. Custom insertion rates are available according to client specifications, limited to a maximum foam flow of 350 l/min with tolerances of ± 10%.

Valves: A check valve is available in all materials and interfaces. A wide range of activating/closing valves for foam supply is available, which can be automatic or activated with or without positive feedback for valve position. A variable insertion rate valve allows selection of insert rates of 1%, 3%, and 6%, which can be manually or remotely operated.

Weight and Installation: The unit weighs 27 kg. Installation requires a straight pipe minimum of 3 x DN at the inlet, with outlet piping to the same specification as the inlet, but no requirements for straight pipe length.

Catalog excerpts

E-mail : [email protected] www.matre.no DATA SHEET STANDARD DESIGN BALLANCED PROPORTIONER

Open the catalog to page 1

MATRE MASKIN' E-mail : [email protected] www.matre.no DATA SHEET Interface for water supply DN 100 PN 16 Interface for foam supply 1 BSPP Female Design pressure Insertion rate Check valve in foam port Activating / closing valve Variable insertion rate Installation requirements Special design for other interfaces 1 Í4" and upwards using adaptors for Test pressure Flow range at maximum Water pressure range Foam pressure range 1-10 bar higher than the water Higher pressure difference between Insertion rate according to client specification limited to a maximum Available in all materials and with...

Open the catalog to page 2

M-BP40

M-BP40

Catalog excerpts

All Matre Maskin AS catalogs and brochures