*mynauticexpo

M-BP15

Product catalog summary

Standard Design: The Balanced Proportioner M-BP15 is designed to mix water and foam for fire suppression systems. It is available in various materials including BS 1400 LG2, BS 1400 AB2, AISI 316, Titanium Gr2, and 6Mo.

Interfaces: The water supply interface options include DN 32 PN 16/40, DN 40 PN 16/40, and 1 1/2” ANSI 16.5 150 lb, with special designs available. Foam supply interfaces are 1” BSPP Female, adaptable to other threads or flanges, and 3/4” SAE 3000 psi.

Pressure and Flow: The design pressure is 20 bar with a test pressure of 30 bar. The flow range at maximum ΔP of 2 bar is 75-700 l/min, extendable to 100-1000 l/min. Water pressure ranges from 5-19 bar, while foam pressure must be 1-10 bar higher than water pressure, limited to 20 bar.

Insertion Rates: Standard insertion rates are 1% and 3% with tolerances of 0% to +30%. Custom insertion rates are available, limited to a maximum foam flow of 150 l/min with tolerances of ±10%.

Valves: Check valves are available for all materials and interfaces. A variety of activating/closing valves are offered, with options for automatic or manual operation, and positive feedback for valve position. Variable insertion rates can be selected via manual or remote-operated valves for 1%, 3%, and 6% rates.

Weight and Installation: The unit weighs 16 kg. Installation requires a straight pipe of at least 3 x DN at the inlet, with outlet piping matching the inlet specification but without straight pipe length requirements.

Catalog excerpts

E-mail : [email protected] www.matre.no DATA SHEET STANDARD DESIGN FLOW DIRECTION- FOAM INLET BALANCED PROPORTIONER

Open the catalog to page 1

MATRE MASKIN' E-mail : [email protected] www.matre.no DATA SHEET Interface for water supply DN 32 PN 16 / PN 40 Special design for other interfaces Interface for foam supply 1" BSPP Female 1" and upwards using adaptors for any Design pressure Test pressure Flow range at maximum Water pressure range Foam pressure range Insertion rate Check valve in foam port Activating / closing valve Variable insertion rate Installation requirements 1-10 bar higher than the water Higher pressure difference between Insertion rate according to client specification limited to a maximum Available in all materials...

Open the catalog to page 2

M-BP15

M-BP15

Catalog excerpts

All Matre Maskin AS catalogs and brochures