2015 Pumps - Signal Horns Catalog
20Pages

CATALOG 2015 PUMPS SIGNAL HORNS

ABOUT US MATE GROUP and MATE USA are the brands resulted from the cooperation between MARCO and TESSILMARE and aims at achieving a leading role in the worldwide marine sector. The international experience of both Italian manufacturers is the foundation on which MATE GROUP will be building its ambitious distribution plan. MATE GROUP has been structured to meet the expectations and stimuli of the contemporary global market. New scenarios have been found to reach such goal, where technological solutions and computer means of communication can be integrated and well-balanced. MATE GROUP stands...

BILGE AND WATER TRANSFER Completely submersible bilge pumps. Compact design with ABS material housing, corrosion resistant. ISO 8849 and ISO 8846. HEAVY DUTY PART NUMBER FLOW RATE Automatic float switch for bilge pumps. AS2 PART NUMBER

BILGE AND SALT WATER PUMPS Self-priming electric pump with flexible nitrile impeller. Now available in 3 different flow rates: 7.4, 9.25 and 11.9 gpm. Fitted with water proof cable guide and internal brush holder with EMI filter. ISO 8846 and ISO 8849. Ideal for bilge, waste water and ballast tank on any type of boat. PART NUMBER FLOW RATE

Electronic Water System Pumps Self-priming automatic electric pumps with helical PTFE gears, integrated check valve and electronic control. Nickel-plated brass body and stainless steel shaft. Control panel available. Main applications: fresh water pressure systems and shower kits on boats, sailing boats and campers. Available also in 13.8 gpm, 17.5 gpm and 21.1 gpm. Advantages: ● Constant control of pressure, current and voltage. ● The motor gradually runs to reach the required flow rate. ● There is no need for an accumulator tank. ● Reduction of noise, current absorbtion and mechanical...

Diesel Transfer Gear Pumps Compact and professional selfpriming electric pumps with bronze gears for transferring of liquids. Pump body in nickelplated brass and stainless steel shaft. Main applications: transfer of diesel fuel and antifreeze. HIGH SPEED PART NUMBER FLOW RATE PORTS (male)

110V & 220V Pumps Self-priming electric pumps with gears for transferring of fuel and oils. Nickel-plated brass body and shaft in stainless steel AISI 420. Voltage available 110V and 220V single phase. For 110V items minimum order quantity required. PART NUMBER 8 amps 4 amps 2,5 amps 1,25 amps 5 amps 2,5 amps 2,5 amps 1,25 amps

Diesel Refueling Vane Pumps Self-priming electric vane pump with integrated by-pass valve. Aluminium body. Multiple quick-fit connections for 1” pipe. Rotor and vanes made of resin. Has brush holder with EMI filter, On/Off switch and battery clips. Main applications: diesel, oil and antifreeze transfer. Available also with case and handle for easy transport. PART NUMBER FLOW RATE PORTS (male)

Oil Transfer Gear Pumps Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Main applications: draining engine sumps and lubricating engines. PART NUMBER FLOW RATE PORTS (male)

ON/OFF Integrated Switch Pumps with Reversing Option Self-priming electric pumps for the refueling and transfer of diesel, oil and water with ON/ OFF switch integrated into the water-proof cap. The R versions are fitted with a 3-position switch for reversing the flow direction. ATED INTEGR H SWITC BRONZE GEARS PTFE VANES FLEXIBLE RUBBER IMPELLER BRONZE GEARS PART NUMBER FLOW RATE PORTS (male) PART NUMBER PORTS (male)

Oil & Diesel Transfer Kits Compact size oil change kits. Easy to operate and carry. Reversible: drains and fills oil and diesel. Complete with bronze gear pump, clips, fuse, hoses and accessories. PEED LOW S IBLE S REVER ONIC & ELECTR SIBLE REVER Electronic control panel and 12/24V universal voltage. Variable speed of the motor proportional to the liquid viscosity. Suitable for oil and diesel. Oil change kit with manual control, 12V or 24V. Reversible: drains and fills oils. PEED LOW S IBLE S REVER Compact size oil change kit with integrated 3-position switch for flow reversibility. PART...

Reversible Oil & Diesel Pumps Pumps for oil and diesel filling and draining with electronic controls. The touchpad electronic sensor adjusts the speed of the motor according to the liquid viscosity and temperature. Compact design fits in any engine room. Automatic shut-off for empty tank and short circuit. System will shut-off after 30 minutes of operation. Fittings with 1 or 2 valves available. PART NUMBER PART NUMBER PART NUMBER PART NUMBER PORTS (male) FLOW RATE PART NUMBER

Oil Change Systems Compact, easy to use oil change system for fixed installations that eliminates leaks. Used for oil filling and draining operations. Applications include generators, engines, transmissions and catwalks. The touchpad electronic sensor adjusts the speed of the motor according to the oil viscosity and temperature and increases the system speed during priming. Automatic shut-off for empty tank and short circuit. System will shut-off after 30 minutes of operation. PART NUMBER PORTS (male) FLOW RATE

IMO/USCG Approved Horns 12-20 m (40-65 ft) Approved signaling whistle complete with chromed or white horn Ø200mm, electric compressor and mounting accessories. Meets COLREG 1972 IMO class IV regulations. Approvals: NMMA ABYC A-23, RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS. Spare parts and accessories PART NUMBER M1-W Type Part Nr. MR50-000-33 12V Compressor M1-W Type Part Nr. MR50-000-34 24V Compressor

IMO/USCG Approved Horns 12-20 m (40-65 ft) Approved electronic whistle complete with loudspeaker, built-in touchpad control panel and electronic controller. New ultrasonic heating system for improved acoustic membrane performance. Meets COLREG 1972 IMO class IV international regulations with NMMA ABYC A-23, RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS, and BSH homologations. Includes mounting kit. PART NUMBER PART NUMBER

IMO/USCG Approved Horns 20-75 m (65-246 ft) Approved whistle complete with chromed or white horn Ø 300 mm. Electric valve and mounting accessories, for compressed air operation 6/12 bar. Meets COLREG 1972 IMO class III regulations. Approvals: NMMA ABYC A-23, RINA, LLOYD’S REGISTER MCA, BUREAU VERITAS. Spare parts and accessories PART NUMBER M3 Type Part Nr. M135-100-12 12V Compressor M3 Type Part Nr. M135-100-13 24V Compressor