MARINER 700 & MARINER 801
2Pages

mas mase GENERA TORS MARINER 700 MARINER 801 6.7 kW 7.8 kW 50 Hz 60 Hz Control Panel The gen-set control panel was designed to include, in one single panel, the switches, control devices and the protection devices The components are the following : • Engine cut-off module for automatic stop of engine in case of high water temperature, low oil pressure, high alternator temperature. • Hour-meter. • Start-stop button. • Breaker for protection against of overload or short circuit. • Thermal switch for D.C. electric circuit. Engine • Easy access in case of maintenance to the feeding system and lubrication, of the sea/water pump and the air filter. • Safety stop in case of low oil pressure. • Safety stop in case high water/exhaust gas temperature. • Oil and fuel filters of easy access. Alternator • Synchronous, 4 poles, self-excited. • Rotor and stator coated with epoxy resin against external agents. • Rotor dynamically balanced. • Insulation class H. Engine Model Type Cylinders (nr.) Cylinder block material Bore (mm) Stroke (mm) Displacement (cc) Power (hp) RPM Combustion system Engine head material Speed governor Lubrication system Oil sump capacity Engine stop system Fuel pump Fuel pump discharge (cm) Full load consumption (l/h) Starting battery (Ah-V) Battery charger (Ah-V) Starter (kW-V) Max. inclination Water pump flow (l/min) Alternator Type Cooling Voltage (V) Frequency (Hz) Amps Max. power (kW) Continuous power (kW) Power factor ( cos ø ) Insulating class Voltage stability Frequency stability 50 Hz 60Hz Yanmar 3TNV76 Diesel 4 stroke 3 Cast iron 76 78 1116 12,5 15,1 1500 1800 Indirect Cast iron Centrifugal mechanical Forced 3,5 Stop solenoid Electric 70 2,3 2,6 70 - 12 40 - 12 0,9 - 12 30° 25 28 50 Hz 60Hz Synchronous, 4-poles, self-excited Air 115 - 230 120 - 240 50 60 58,3 - 29,1 65 - 32,5 6,7 7,8 6,2 7,2 1 H ±10% ±5% Soundproof cabin Cooling system A new project engineering design with a structure of a draw piece of aluminum supporting, painted aluminum panels type 5754 of high resistance to external agents. Good accessibility inside canopy, makes maintenance services more easy. The cooling of the engine is based on a closed inner flow of coolant. The system is based on a cupronickel heat exchanger seawater/coolant type, where the thermal exchange occurs between coolant and seawater. Two separate pumps contribute to the flow of the coolant and the sea water.

700 50 Hz 801 60 Hz mas ma s e GENERA TORS 50 Hz 60Hz 868 x 540 x 618 mm (with canopy) 230 Kg.(with canopy) 51 dBA at 7mt 53 dBA at 7mt Dimensions (Leng. x Width x Height) Weight Noise power level 1 9 13 12 10 14 1234567- 8910 11 12 13 14 - Control panel Engine oil filter cartridge Oil dipstick Engine oil cap Air filter Closed circuit water pump Seawater pump FITTINGS EXHAUST COMPONENTS KIT SIPHON BREAK WATER-GAS SEPARATOR KIT STARTING REMOTE CONTROL INSTRUMENTS Dealer: 8 5 2 3 4 7 6 Fuel filter Seawater exhaust connection (ø 50mm) Seawater inlet (ø 16mm) Battery connection Fuel tank...