Catalogs >
Martek Marine >
MM2000 A/C Inlet Gas Detection

MM2000 A/C Inlet Gas Detection
2Pages

Catalog excerpts

AIR CONDITIONING INLET GAS DETECTION SYSTEM FOR ISGOTT 5 GUIDELINES gas detection system designed to provide flammable gas detection in tanker air conditioning inlets to reflect the guidance in section 24.2 of the newly published 'Fifth Edition of ISGOTT' (International Safety Guide for Oil Tankers & Terminals). single 4-core cable having the capacity to monitor from 1 to 32 addressable sensors. The control system provides local indication of the measured parameters and alarm conditions together with relay contacts to shut down air conditioning on detection of flammable vapours in the air conditioning (A/C) inlets. © LOOP SENSOR CABLE FOR LOW COST INSTALLATION © COMPACT PANEL FOR THE SMALLEST CCR © CONTINUOUS MONITORING OF ALL SENSORS © RELAY CONTACTS FOR SHUTTING DOWN A/C

Open the catalog to page 1

Sensor Points User Interface Ingress Protection =lammable) toxic (eg: H2S), oxyger 4 line alphanumeric LCD indicating Sensor address; gas type concentration (rising or falling); peak nold; alarm status; system fault; line fault; line inhibit Twin Green LED's Twin Amber LED's Venu driven via LCD and 6No, pane nounted membrane pushbuttons with security 3 alarm levels per channe 16 user programmable volt-free SPCC 'elays for shutting down air conditioning or other machinery as required N/E or Common fault relay SPCO N/E or N/DE Vains fail relay SPCO N/E or N/DE 9 way D- type connector...

Open the catalog to page 2

MM2000 A/C Inlet Gas Detection 2Pages

Catalog excerpts

All Martek Marine catalogs and brochures

MM2000 A/C Inlet Gas Detection
2Pages