*mynauticexpo

Centurion

Product catalog summary

Overview: The CENTURION™ is an independent high-level and overfill alarm system designed for tankships, complying with USCG and IMO requirements. It features electrically independent alarm systems for 95% and 98% tank levels, housed in a controller located in the cargo control room.

Level Detection: The system uses MM500™ stainless steel float switches available in dual or single versions, and optionally, the MM502™ ultrasonic switch, which has no moving parts and is also available in dual or single versions.

Alarm Indication: Local audio/visual alarms are provided for each tank, along with relay contacts for remote alarm annunciation. The alarms are stainless steel, weatherproof, and intrinsically safe.

Compliance and Support: The system complies with USCG, IMO, and general Class rules, is fully checkable at the sensor head, and is supported by worldwide service, commissioning, and backup.

Specifications:

Inputs: 24 switched inputs
Indicators: Red LED per input, Green power LED, common Amber fault alarm LED
Environmental Data: -10°C to +50°C, 0-90% RH, IP54
Dimensions: 296mm(W) x 260mm(H) x 140mm(D)
Weight: 3.6 kg
Cable Entry: Top, bottom, or rear
Alarm Relays: 4 SPCO rated 5A @ 230V ac, latched until reset
Audible Alarm: 85dB(A) @ 30cm
Power Supply: 230V ac/110V ac and/or 24V dc alarms

Material and Construction:

Ultrasonic Switch: AISI 316SS, weight 6kg, max pressure 40 bar, operating temperature -40°C to +90°C, IP68 ingress protection
Float Switch: 316SS, weight 6kg, max pressure 5 bar, operating temperature -40°C to +150°C, hermetically sealed, IP68 ingress protection

Control Panel: Includes MM500™ Dual Float Level Switch and MM502™ Ultrasonic Level Switch.

Catalog excerpts

CENTURION Independent High Level Overll Alarm System CENTURION™ is a high level & overfill alarm system designed in compliance with USCG & IMO requirements for tankships. Electrically independent alarm systems for both 95% & 98% tank levels are housed in the CENTURION™ controller in the cargo control room. Level detection is carried out by MM500™ stainless steel float switches which are offered in either dual or single (overfill) versions. Optionally we offer the MM502™ ultrasonic switch, which has no moving parts and is also available in dual or single versions. Local audio/visual alarm indication is provided for each tank together with relay contacts for remote alarm annunication. Stainless steel / weatherproof alarms Intrinsically safe Complies with USCG, IMO and general Class rules Fully checkable at sensor head Worldwide service, commissioning and back-up

Open the catalog to page 1