*mynauticexpo

TS5

TS5

Product catalog summary

Appendices / Appendages
Daggerboards are made of glass/vinylester. Suspended rudders are mounted on stokes and articulated with self-aligning roller bearings. The steering system includes a tiller and direct transmission via a rigid carbon tube.

Plumbing and Electricity
The vessel features a 12V electrical circuit with a control panel located at the chart table. It includes a battery park of 460A and seven USB sockets distributed throughout the cabins and common areas. Interior lighting is provided by LED lights. The pressurized water system supplies water to the bathrooms and kitchen, supported by two 20L boilers. There are two manual toilets with a black water tank, and drainage is managed by four automatic electric pumps and four manual pumps. A 1500W windlass is installed on the deck.

Engines
The boat is powered by two inboard diesel engines, each with 40 CV and sail drive transmission. It includes two dual folding blade propellers and a 60 Amp start-up battery per engine. The control panel is located at the starboard helm station.

Pricing
The price of the boat, including mast and launch, is 620,000 € excluding VAT and 744,000 € including VAT.

Dimensions and Specifications
The waterline length is 15.24 m, overall length is 15.2 m, maximum beam is 8.6 m, draft is 3.00/1.20 m, and air draft is 23.05 m. The light displacement is 8.6 t, and the maximum displacement is 11 t. The mast length is 20 m, mainsail surface is 88 m², and genoa surface is 60 m². The boat is equipped with 2x Saildrive 40cv engines, diesel capacity of 2x 110 l, and fresh water capacity of 2x 200 l. It has five double berths and falls under design category A.

General Arrangement
The cockpit includes two fixed three-place seats with saddlery and two helm seats with textile protection. The portside platform features a saloon with a table and a fixed five-place seat with saddlery, three mobile seats, a rest area that can be used as a double berth, and storage spaces in the gangway. The starboard side includes an equipped galley and a chart table with a navigation console. Each hull contains an aft cabin with a transversal bed, storage spaces, and portlights, as well as a manual independent WC, shower, and washbasin.

Rigging
The rigging includes a fixed aluminum mast and boom, anodized grey, with monotoron stainless steel standing rigging and Dyneema running rigging. The mainsail and genoa are made of Dacron.

Hulls, Platform, Deck, and Structure
The composite parts are laminated using an infusion process with a sandwich of glass and vinylester resin reinforcement and a PVC foam core. The deck layout includes mainsheet tuning with a 4-line hoist on track with dedicated winches, seven winches in total, and various hatches and portlights for ventilation and access. Safety features include stainless steel pulpits and stanchions with cable guardrails, security padeyes, handrails, docking cleats, cockpit lockers, a safety net, and a swimming ladder.

Catalog excerpts

Appendices / Appendages Derives verre/vinylester Daggerboards glass/vinylester Safrans suspendus sur meches et articules sur des paliers auto-alignants avec palier bas a roulement. Suspended rudders on stokes and articulated with self-aligning roller bearings Barres franches et transmission directe par tube carbone ller and direct transmission by rigi carbon tube Septembre 2018 marsQudon composites Plomberie et Electricite / Plumbing and Electricity Circuit electrique 12 V avec tableau de commande a la table a carte. 12 V electrical circuit with control panel by chart table. Parc batteries de 460A 4690A battery parc 7 prises USB (une dans chaque cabine, a la bannette coursive, a la bannette carree et une a la table a carte). 7 sockets USB (one in each aft cabin, in the gangway bunk, square bunk and one by the chart table). Eclairage interieur LED L D Interior lighting Reseau d'eau sous pression avec points d'eau dans les sanitaires et la cuisine (2x chauffe-eau 20L). Pressurised water system with distribution in bathrooms and galley (2 Boilers 20L) Deux WC manuels equipes de reservoir eaux noires. Two manual toilets and a black water tank Assechement par quatre pompes electriques automatiques dans les flotteurs et quatre pompes manuelles. Draining with four automatic electric pumps in the hulls and for manual pumps. U n Guindeau 1500 w sur pont, One windlass (1500w).on deck Motorisation / Engines Deux moteurs inboard diesel 40 CV avec transmission saildrive. Two inboard diesel engines 40 CV with sail drive transmission. D eux helices bipales bec de canard. Two dual folding blade propellers. U ne batterie de demarrage par moteur 60 Amp. Start-up battery with 60 Amp engine. C ommandes au poste de barre tribord. Control panel by starboard helm station. Prix du bateau mate et mis a i'eau a quai devant le chantier 620 000 € HT excl VAT Price, ex works LORIENT, launched: 744 000 € TTC incl VAT Pour toutes demandes, nous consulter : [email protected] contact us for any query you may have: [email protected] English translation is a commercial aide, all contracts are in French. Longueur a la flottaison : Waterline length: Longueur hors tout : Overall length : Bau Maximum : Maximum Beam: Tirant d'eau : Draft: Tirant d'air : Air draft : Deplacement lege (hors option) : Light displacement (without option): Deplacement max : Maximum displacement : Longueur de mat : Mast length : Surface grand-voile : Mainsail surface : Surface genois : Genoa surface : Motorisation : Engines : Capacite gasoil : Diesel capacity : Capacite eau douce : Fresh water capacity: Nombre Couchette Double : Double berth quantity : Categorie de conception : Conception category : Architecte : Architect : Constructeur : Shipyard : Christophe Barreau / Paris / France Marsaudon Composites / Lorient / France

Open the catalog to page 1

Coques, nacelle, pont et structure / Hulls, platform, deck and structure Aménagements / General Arrangement Cockpit / Cockpit Deux assises fixes 3 places avec sellerie. Two fixed 3 places seat with saddlery. Deux sièges de barre avec protections textile Two helm seats with textile protection Stratification des pièces composites sur moule femelle intégral selon le procédé de l’infusion. Lamination of composite parts in a female tool using infusion process. Sandwich renfort de verre et résine vinylester. Sandwich with glass and vinylester resin reinforcement. Ame en mousse PVC. PVC foam core. Nacelle...

Open the catalog to page 2

All MARSAUDON COMPOSITES - PATTON catalogs and brochures

ORC42
6 Pages
TS42
2 Pages
mc34patton-2
1 Page
mc34patton
1 Page

Archived catalogs

TS 42
5 Pages