Rutland FM910-3 Furlmatic Windcharger
1 / 2Pages

Rutland FM910-3 Furlmatic Windcharger Rutland Windchargers are without doubt one of the most unique and versatile battery chargers in use throughout the world. The Rutland FM910-3 combines the established Furlmatic robust mechanical design with our latest 3 phase generator technology to deliver better performance and greater reliability than ever before. Primarily designed for land based applications, the Rutland FM910-3 has been used worldwide to provide year round power generation. Technical Features and Benefits A low energy remote power site where a grid connection would otherwise cost thousands of Efficient power conversion Rutland Windchargers generate greater ampere hours in real wind conditions than turbines of equal and often larger diameter! This is because our unique high inertia alternator designs maintain momentum between gusts unlike other designs that stall and have to rebuild up speed. This Rutland "flywheel" action results in more free power generated into your battery. Rutland Windchargers are the lowest cost per watt of power generated owing to our many in-house manufacturing efficiencies and volume of production More ampere hours are generated because of the Rutlands' low wind speeds start up (of just 2.6 m/s) so power is being generated in the most typical wind speeds as well as being powerful in the strong winds Automatic 'furling' tail fin directs turbine out of wind above 16 m/s for gale protection Our low friction 3 phase alternators give a smooth and silent output Computer designed efficient aerofoil blades. The fine profile blades have a positive one-way-only fit that have been tested to withstand a loading with a safety factor 10 times the turbine's maximum rpm. EEC directive 89/336/EEC compliance ensures no radiated interference Automatic thermostat protection in prolonged gales Modern, durable materials for excellent reliability and product longevity, typically more than 10 years CHJfflH OMWENT Vt WIMCTEGO RENEWABLE POWER

MOUNTING POLE Mounting pole for land based systems - the 910-3 can be installed on land using a 6m length of 48mm outside diameter tube with 41 mm internal diameter. The mounting pole can be fixed into the ground or on pivot type base. A minimum height of 6m and of 4 guy wires is recommended. More details are given in the installation manual. A Land Tower and Rigging kit is available from Marlec. The Land Tower kit comprises 3x tubes with joiners and a ground fixing spike giving an overall height of 6.4m. This must be supported by the Rigging Kit. VOLTAGE CONTROLLER Choose from 2 electronic...