Do you need power at a remote site? Take advantage of the abundant power of the wind to generate your own free power using the Rutland FMI803-2 Furlmatic Windcharger. The FMI 803-2 needs only a light breeze to start generating power for charging batteries so you have the convenience of energy stored for whenever you need it. Typically the 12V or 24V battery power can be used for: • Telecommunications equipment 230Vappliances can be operated through an inverter 3 blade design with Where grid power is not available the FMI803-2 provides a cost effective solution, charging batteries to deliver 12/24V power which can also be inverted The FMI 803-2 can deliver sufficient power for most daily needs with only occasional use of a generator for high energy consuming appliances, e.g. domestic washing machine. Where a generator is already used the FMI803-2 will soon reduce energy costs and pay for itself in convenience. Direct fuel costs and engine wear and running time will be noticeably reduced. Power at Remote and Inaccessible Sites Professionals providing services such as telecommunications and monitoring at remote locations will find using wind power immediately cost effective and long term convenient. Site visits to change batteries will be reduced and battery life extended. A clean source of energy and it saves you money! • Rutland Windcharger s are an environmentally friendly way of generating power • Battery life is extended as the continuous charging reduces the number of deep discharge • Where generators are in use running and maintenance costs will be reduced. Typical Applications Marlec's FMI800 and FMI803 models have been used worldwide since 1989 in a variety of applications, eg: • Remote homes • Rural Clinics • Scientific & Military Field Applications • Telecommunications sites • Portable power for travelling shows MPC 1 Electronic controller with digital display (shown) is included.

FM1803-2 Furlmatic Windcharger System Updated and more powerful! Technical Features The FM1803-2 Furlmatic Windcharger with its robust 3-bladed wind turbine is supplied with it's purpose designed controller. • New 3 bladed turbine design combines an efficient profile with a durable injection moulded construction. • The 3 phase generator has a very low torque enabling power generation to start from just 3m/s (<7mph) windspeed. • Rutland unique disc type brushless generator design has a high degree of inertia that keeps the turbine spinning between gusts of wind where other designs stop and start....

Tower - various designs are available that are adaptable to fit the FMI803-2 turbine's post fitting. A pole with an 81mm internal and 91mm external diameter is needed to affix the turbine to the tower. Lattice, freestanding and guyed towers are all suitable depending on the terrain, height and application. Wind loading figures for your tower design are available on request from Marlec. Batteries - deep cycle lead acid batteries either sealed or unsealed are suitable for charging from the FMI 803-2. A Cable - 3 core cable is required. The thickness to distance recommendations are: up to 50m 1.5mm2...