MCN cone fender
6Pages

Maritime International’s MCN cone fender represents the most modern technology being offered in the fender industry today. MCN fenders have some of the highest energy to reaction ratios of any fender type leading to efficiencies in smaller frontal panels and lighter less costly fender systems. The cone can be mounted backwards with the small end anchored or bolted to the supporting structure allowing it to fit in areas where a more traditional cell fender cannot. Type: Buckling Cone Nominal Deflection: 70% Buckling Deflection: 42.5 % Max Deflection: 72.5% E to R ratio: High Durability: Medium to High Special Design Comments: • MCN cone fenders have a very high deflection capability that requires that a stool be mounted to the nose of the fender to allow the fender to fully deflect. This stool is required to be 15% of the cone height or greater. • The high deflection capability requires that all parts of the fender system be checked for contact with the supporting structure, especially under high angular berthings and also when high vessel hull flare angles are present. • The MCN cone fender is not sensitive to energy loss from compression angles under 10°. • Cone fenders are not universally compatible between manufacturers and caution should be used when purchasing cones for replacement of previously installed cone fenders. • Venting of fender interior may be necessary due to possible water entrapment if water levels rise above the bottom of the fender body. STOOL HEIGHT Deflection Characteristics: © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.

Threaded Socket Bolt Size % of Design % of Design Reaction Energy Reaction Energy © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.

MCN Performance - Metric Units MCN 300 R kN © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.

MCN Performance - Imperial Units MCN 300 R E R E R E R E R E R E R E R E R E R E R E R E R E R E R E kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips kips ft-kips © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.

© 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.

© 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.