Chain Shackles & Anchors Maritime International designs and manufactures a complete range of fixing hardware and accessories to compliment our fender systems. From cast-in socket embedment hardware to standard drill and epoxy threaded rods, we can design a fixing system to match your requirements and save you time. Fixings are available in an array of material standards and can be manufactured to almost any required specifications. Chains, shackles, and other accessories available in standard grades and sizes. © 2013 Maritime International - All rights reserved. V2.1 Other sizes available. Dimensions are subject to change. Verify current dimensions with Maritime when ordering any fender.

Dock Fender Chain Maritime International’s dock fender chain is a versatile open link high strength chain suitable for all fendering applications. The long inside length and wide inside width allows standard shackles to fit through the link without the need for special end links or the need to double shackle the end. Maritime’s dock fender chain can be supplied in any practical length and is typically supplied with a hot dip galvanized finish. All sizes are proof tested at the factory and a certificate of testing can be provided. • All chain is heat treated after welding and before proof testing....

Anchor Shackles Maritime International’s safety bolt anchor shackles are suitable for all fendering applications. The large bow allows multiple chains to be attached to one shackle when necessary. The shackles can be supplied in a wide range of sizes. The strength of these shackles exceeds most chain strengths of comparable size. • Shackles are forged, quenched, and tempered with alloy safety bolt-type pins. • Hot dip galvanized finish. • Stainless steel cotter pins. • D-Type shackles are also available. Anchor Shackle Dimensions - Imperial (in) Nominal Size Breaking Strength (Kips) Above strengths...

Anchor Bolts & Fixing Hardware Maritime International provides a full range of hardware solutions and accessories to go along with our fender systems. All materials are made of standard high strength steels, and galvanizations specially made for the marine environment, or manufactured to suit project requirements. Maritime can also accommodate any size diameter and length requirements needed. Embedded Back Bolt (HDG or SS) Anchor Dimensions - Imperial (in) Size øA Front Bolt Dimensions Coupler Dimensions Back Bolt Dimensions Anchor Dimensions - Metric (mm) Size øA Front Bolt Dimensions Coupler...