- Catalogs
- Marinova Floating Systems B.V.
- DD EPDM Rubber Fender
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
DD EPDM Rubber Fender
1 / 1 PageView full catalog
DD EPDM Rubber Fender
Product catalog summary
Dimensions & Geometry
The document specifies the dimensions and tolerances for a product. The outer height is 100 mm with a tolerance of ±5%, width is 95 mm with a tolerance of ±5%, bore is 60 × 48 mm with a tolerance of ±10%, length is 10,000 mm with a tolerance of ±30 mm, and the nominal weight is 8 kg/m with a tolerance of ±10%.
The document specifies the dimensions and tolerances for a product. The outer height is 100 mm with a tolerance of ±5%, width is 95 mm with a tolerance of ±5%, bore is 60 × 48 mm with a tolerance of ±10%, length is 10,000 mm with a tolerance of ±30 mm, and the nominal weight is 8 kg/m with a tolerance of ±10%.
Material Properties
The base material is EPDM (Ethylene Propylene Diene Monomer), conforming to ASTM D2000 Type M. It has a hardness of 70–78 Shore A, targeting 75. The tensile strength is 7 MPa, elongation at break is 250%, and compression set is 35% after 22 hours at 70°C. It shows no cracks under ozone resistance testing (50 pphm, 40°C, 72h, 20% strain). The thermal range is from -40°C to +90°C, with a short-term tolerance up to +110°C. The density ranges from 1.15 to 1.25 g/cm³.
The base material is EPDM (Ethylene Propylene Diene Monomer), conforming to ASTM D2000 Type M. It has a hardness of 70–78 Shore A, targeting 75. The tensile strength is 7 MPa, elongation at break is 250%, and compression set is 35% after 22 hours at 70°C. It shows no cracks under ozone resistance testing (50 pphm, 40°C, 72h, 20% strain). The thermal range is from -40°C to +90°C, with a short-term tolerance up to +110°C. The density ranges from 1.15 to 1.25 g/cm³.
Performance & Environmental Resistance
The material is UV and ozone resistant due to stabilizers, exhibits excellent resistance to seawater and weathering, and has good resistance to dilute acids and alkalis. However, it is not recommended for exposure to oil or fuel.
The material is UV and ozone resistant due to stabilizers, exhibits excellent resistance to seawater and weathering, and has good resistance to dilute acids and alkalis. However, it is not recommended for exposure to oil or fuel.
Finish & Color
The product is black with a smooth extrusion skin finish. It includes UV stabilizers with 30 phr carbon black.
The product is black with a smooth extrusion skin finish. It includes UV stabilizers with 30 phr carbon black.
See more
Catalog excerpts
2. Material Properties Base Material: EPDM (Ethylene Propylene Diene Monomer), ASTM D2000 Type M. Hardness: 70-78 Shore A (Target 75) Tensile Strength: >7 MPa Elongation at Break: >250% Ozone Resistance (50 pphm, 40°C, 72h, 20% strain): No cracks Thermal Range: -40°C to +90°C (short-term +110°C) • UV and ozone resistant with stabilizers. • Excellent seawater and weathering resistance. • Good resistance to dilute acids and alkalis. • Not recommended for oil or fuel exposure. Color: Black Finish: Smooth extrusion skin UV stabilizers (>30 phr carbon black).
Open the catalog to page 1All Marinova Floating Systems B.V. catalogs and brochures
General Marinova Catalogue24 Pages
Related Searches
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.