MARINE TENDERING SYSTEMS • BUOYS • FENDERS • DREDGE FLOATS • • PILINGS • PORT SECURITY BARRIERS • • DONUT FENDERS • CAMELS • MARINE HARDWARE • MARINE FENDERS INTERNATIONAL, INC. 909 Mahar Ave. • Wilmington • California • 9C744 • USA

MARINE FENDERS INTERNATIONAL, INC. ENGINEERED FOR EXCELLENCE Marine Fenders International, Inc. is on the cutting edge of marine fendering and buoyancy system technologies.. As a driving force in the marine industry, Marine Fenders International’s advancements in polyurethane elastomers, a critical components in any composite buoy or fender system, are unparalleled in strength and durability. MFI’s staff has over 30 years of experience in the marine and polyurethane industries, which challenges the competition to keep up with our ever increasing standards of excellence through relentless research...

TABLE OF CONTENTS OCEAN GUARD™ Netless Foam Filled Fender OCEAN CUSHION™ Foam Filled Fender with Chain & Aircraft Tire Nets OCEAN GUARD™ Small Standard Duty Foam Filled Fender OCEAN GUARD™ Monopile Floating Donut Fender OCEAN GUARD™ Resilient Foam Filled Buoys OCEAN GUARD™ Resilient Dredge Floats OCEAN GUARD™ Port Security Barriers Systems OCEAN GUARD™ Coated Piles OCEAN CAMEL™ Composite Camels MARINE HARDWARE www.marinefendersintl.com Copyright 2010 3

OCEAN GUARD ™ Netless Foam Filled Fender The Ocean Guard™ Netless Foam-Filled Marine Fender is a unique and innovative fendering system, providing high-energy absorption with a relatively low reaction force. Its heat laminated foam core allows it to reliably and safely absorb large amounts of energy when its compressed. The closed cell aspect of the energy absorbing foam allow the fender to be fully functional even if the skin has been accidentally punctured. PERFORMANCE FEATURES HIGH ENERGY ABSORPTION Ocean Guard™ Netless Foam Filled Marine Fenders efficiently absorb significant amounts of energy...

HULL CONFORMING CAPABILITIES The resilient nature of a foam-filled Ocean Guard™ Netless Fender give it the unique ability to conform to a vessel's hull contours and extremities, such as rub rails. This hull conforming feature eliminates point loading, which occurs with panel type fenders, on hull contours and therefore evenly distributes energies over a greater surface area. This results in much lower hull pressures. HULL CONFORMING KULNI LJAULNL, rrj^M-nLLED TENDER BUCKLING r>iNDEi? HULL CQHFDRMtNG POINT LOADING T DA H-TILLED TENDER BUCKLING FENDER The nylon filament reinforced urethane elastomer...

LOW MAINTENANCE The design of the foam-filled Ocean Guard™ Netless Fender is highly resistant to environmental hazards such as extreme temperatures, hydrocarbons, fresh and salt water, ozone and ultraviolet radiation. The fender skin is even resistant to chemicals such as diesel fuels. Additionally, since the internal construction consists of a solid heat laminated foam core, there is no need to maintain air pressure, inflation or relief valves, as with pneumatic fenders INSTALLATION Ocean Guard™ Netless Fenders are designed for easy installation. Their buoyant construction allows the option...

CONSTRUCTION FEATURES FOAM CORE Construction begins with a resilient energy absorbing closed cell cross-linked polyethylene foam core which is heat laminated into a one piece solid foam core. This heat lamination process produces a thermal bond between the layers of foam which is stronger than the foam itself which, will not delaminate even under the most abusive berthing conditions. This ensures that the foam core construction of the fender will provide years of quality service and performance. URETHANE SKIN AND ENERGY ABSORBING FOAM CORE CONSTRUCTION Continuous filament nylon tire cord reinforcement...

SWIVEL END FITTINGS All Ocean Guard™ Netless Foam Filled Marine Fenders are constructed with integral swivel end fittings at each end of the fender. The swivel end fittings are internally connected with a heavy duty stud link chain and is designed and sized to transmit the safe working loads through the fender. During the fender skin construction the reinforcement filaments wrap around each end fitting housing. The swivel end fittings are designed to allow each swivel on each end of the fender to rotate independently and freely on the axis of the fender even under full compression. 8 www.marinefendersintl.com...

LABORATORY TESTED Ocean Guard™ Netless Fenders are tested at independent testing laboratories to the latest US Navy, US Coast Guard, PIANC and ASTM specification. Our fenders are manufactured and inspected in accordance to the US Governments quality specifications and requirements. Independent inspection certification are available upon request from ABS, BUREAU VERITAS, DNV, LLOYDS and others. Skin thickness testing on each fender FENDER TESTING AT 60% COMPRESSION In accordance to US Navy specifications www.marinefendersintl.com Copyright 2010 9

PROVEN APPLICATIONS Ferry Terminals Coast Guard Dredging Operations Navy Navy 14 www.marinefendersintl.com ENGINEERED FOR EXCELLENCE Copyright 2010

PROVEN APPLICATIONS Container Terminals ENGINEERED FOR EXCELLENCE www.marinefendersintl.com Copyright 2010 15

PROVEN APPLICATIONS

PROVEN APPLICATIONS Easy Installation ENGINEERED FOR EXCELLENCE www.marinefendersintl.com Copyright 2010 17

OCEAN CUSHION ™ Foam Filled Marine Fender with Chain & Aircraft Tire Nets The foam-filled Ocean Cushion™ Fenders, with chain & aircraft tire nets, are designed to provide a high rate of energy absorption with a relatively low reaction force. Constructed with the same high quality materials and innovative technology as our Ocean Guard ™ Netless foam filled fenders, their low maintenance proven design provides reliable performance in today's demanding marine environments. PERFORMANCE FEATURES HIGH ENERGY ABSORPTION The foam-filled Ocean Cushion™ Fenders, with chain & aircraft tire nets, are designed...