304EL-BX

304EL-BX

Product catalog summary
Specification Sheet Summary
Product Overview: The document details the specifications for a non-metallic locking inlet with a catalog number 304EL-BX, designed for electrical applications.
Specifications:
  • Rating: 16 amperes, 230 volts, 50 Hz, single-phase, 2-pole, 3-wire.
  • Materials: The cap and bezel are made of glass-filled polyester, while the plug body is nylon with a Comparative Tracking Index (CTI) greater than 600 volts. Contact blades and terminal parts are nickel-plated brass. The rear enclosure is also glass-filled polyester with a UL flammability rating of 94V-0.
  • Terminals: Clamp-type terminals that accept up to 4 mm² wire.
  • Enclosure: Includes an integral strain relief for oval jacketed cable, with cable exits at a right angle to the enclosure in any of 8 positions.
  • Blades: Nickel-plated brass blades, 1.8 mm thick.
  • Mounting: Three mounting holes, 4.1 mm in diameter, spaced 120° apart on an 80.3 mm diameter circle. Mounting screws are not provided.
  • Mounting Gasket: Made of solid neoprene, 1.6 mm thick.
  • Cap Closure: Features a pressure close with an Easy Lock™ bayonet style locking system, providing a weather seal when used with cords having threaded or Easy Lock™ sealing rings.
Dimensions: All dimensions are provided in millimeters.
See more

Catalog excerpts

304EL-BX-1

SPECIFICATION SHEET Web site: www.marinco.com Phone: 800-307-6702 Date: September, 2013 Rev: 00 Inlet, Locking, Non-metallic 16A, 230V Catalog Number: 304EL-BX Item: Inlet, non-metallic locking. Cap & Bezel are glass-filled polyester. Plug body is nylon with CTI greater than 600 volts. Contact blades and terminal parts are nickel plated brass. Rear enclosure is glass-filled polyester with UL flammability rating of 94V-0. Clamp-type terminals accept up to 4 mm² wire. Provided. Has integral strain relief for oval jacketed cable. Cable exits at right angle to enclosure in any of 8 positions. Blades are nickel-plated brass 1.8 mm thick. Mounting screws: Not provided. Three mounting holes are 4.1 mm diameter, 120° apart on 80.3 mm diameter circle. Mounting Gasket: Solid Neoprene, 1.6 mm thick. Pressure close. Provided with Easy Lock™ bayonet style locking system. Provides weather seal when used with cords having threaded, or Easy Lock™ sealing rings. Dimensions shown in millimet

 Open the catalog to page 1

Archived catalogs

  1. Marinco Catalog

    104  Pages

  2. 2008 catalogue

    57  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.