*mynauticexpo

304EL-B

Product catalog summary

Product Overview: The document provides specifications for a non-metallic locking inlet, catalog number 304EL-B, designed for marine applications. It is rated at 30 amperes and 125 volts.

Materials: The cap and bezel are made of glass-filled polyester, while the plug body is constructed from nylon with a Comparative Tracking Index (CTI) greater than 600 volts. Contact blades and terminal parts are nickel-plated brass, and the rear enclosure is also glass-filled polyester with a UL flammability rating of 94V-0.

Terminals: The inlet features clamp-type terminals with No. 10 terminal screws that can accommodate up to 8 AWG wire.

Enclosure: An enclosure is provided, featuring integral strain relief for oval jacketed cables. The cable exits at a right angle to the enclosure and can be positioned in any of eight directions.

Blades: The blades are made of solid brass and are 0.07 inches thick.

Mounting: Mounting screws are not provided, but No. 8 panhead screws are recommended. There are three mounting holes, each 0.16 inches in diameter, spaced 120° apart on a 3.16-inch diameter circle. A solid neoprene gasket, 1/16 inch thick, is included for mounting.

Cap Closure: The cap features a pressure close mechanism with an Easy Lock™ bayonet style locking system, providing a weather seal when used with cords that have threaded or Easy Lock™ sealing rings.

Certifications: The product is UL Marine listed (File E57672) and CSA certified (File LR81290). It complies with ABYC and Coast Guard standards.

Dimensions: All dimensions are provided in inches.

Catalog excerpts

Inlet, Locking, Non-metallic 30A,125V Inlet, non-metallic locking. Rating: Materials: Terminals: Enclosure: 30 amperes, 125 volts. Cap & Bezel are glass-filled polyester. Plug body is nylon with CTI greater than 600 volts. Contact blades and terminal parts are nickel plated brass. Rear enclosure is glass-filled polyester with Ul flammability rating of 94V-0. Clamp-type terminals. No. 10 terminal screws accept up to 8 AWG wire. Provided. Has integral strain relief for oval jacketed cable. Cable exits at right angle to enclosure in any of 8 positions. Blades are solid brass 0.07" thick. Mounting screws: Not provided. No. 8 panhead recommended. Three mounting holes are 0.16" diameter, 120° apart on 3.16" diameter circle. Mounting Gasket: Solid Neoprene, 1/16" thick. Cap Closure: Pressure close. Provided with Easy Lock™ bayonet style locking system. Provides weather seal when used with cords having threaded, or Easy Lock™ sealing rings. Listings: UL Marine listed, File E57672 CSA certified, File LR81290 Complies with ABYC and Coast Guard Standards. Dimensions shown in inches

Open the catalog to page 1

All Marinco catalogs and brochures

Archived catalogs

Marinco Catalog
104 Pages
2008 catalogue
57 Pages