28106 - Marinco On-Board Battery Charger
4Pages

SPECIFICATION SHEET PRODUCT NUMBER: 28106 - Marinco On-Board Battery Charger This 28106 model is a 1 bank, 6 amp, 12V DC output charger with wide input voltage range (100-240V AC), is microprocessor controlled and has a maintenance mode that will keep the charger fully charged. The Marinco 28106 meets the CEC (California Energy Commission), FCC, CE, is RoHS compliant and has UL and CSA listings (cULus). The 28106 has the same mounting dimensions as the Guest 2608A and 2608A-B and replaces these models. 1. DESCRIPTION 1.1. Dimensions Reference only Height 3.5 inches 8.89 cm 1.2. Mounting Bulkhead mount (vertical at wall) Hole diameter is .245 inches / .622 cm or clearance for #10 screw Left to Right Center to Center = 5.671 inches / 14.40 cm Top to Bottom Center to Center = 1.465 inches / 3.72 cm 1.3. Weight (reference) Approximately 4.0 lbs. (1.8 kg) Printed copies of this specification are for information purposes only and are uncontrolled. Printed copies are REFERENCE SPECIFICATIONS after the date of printing. This document was printed on 6 July, 2015.

SPECIFICATION SHEET 1.4. Connection 1.4.1. AC 6’ (1.8 m) AC Cable with NEMA L5-15P AC Plug. Cable consists of 18/3 SJTOW cord with one BLACK (HOT), one WHITE (NEUTRAL) and one GREEN (GROUND) 1.4.2. DC 4’ (1.2 m) DC output cable, 18 gauge wires, SJTOW with ring terminal connection 2. FEATURES 2.1. Waterproof The Marinco 28106 has an IP68 rating. This rating is described as dust tight and protected against the effects of immersion in water under pressure for long periods. 2.2. Charge Indicators Unit has 2 LEDS, one Red and one Green in color. The following table should be used as indicator of...

SPECIFICATION SHEET 3.2. Input rating Input Voltage Range: Input Current rating: 3.3. Voltages / Current Output Voltage Output Current 3.3.1. Soft Start - “Soft Start” slowly charges the battery with 14.25V (10% of rated current). As soon as the max Soft Start timer (starts immediately when entering “Soft Start”) of 6 hours is reached or when the battery reaches 10V for 30 seconds the charger switches to the “Bulk stage”. 3.3.2. Bulk - “Bulk” charges the battery with 14.3V (100% of rated current) until the battery reaches 13.25V. As soon as the battery reaches 13.25V the Bulk timer will...

SPECIFICATION SHEET 4. AGENCY CERIFICATIONS cULus ABYC CE CEC FCC RoHS ANSI/UL 1236 "Battery Chargers for Charging Engine-Starter Batteries" E227501 American Boat & Yacht Council = UL 1236 marine section A20 (Battery Chargers), E8 (AC Systems on Boats), E9 (DC Systems on Boats) 2006/95/EC (safety directive) , EN 60950-1:2006 + A11: 2009 + A1:2010 + A12:2011 applied for 230V models CB Mark for 120V Labeled, FCC Part 15 Class B EN 55022 Compliant 5. WARRANTY This product has a 2 year warranty. 6. REVISION HISTORY Revision Product Specification Change Summary Effective Date Initial Release B...