Bayside Utility Center

Product catalog summary

General Specifications - Bayside Utility Center BU3050

Acceptable Manufacturers: The utility center must be manufactured by Marina Electrical Equipment, Inc.

General Requirements: The utility center must be listed, marked, tested, and certified to conform to relevant standards, including NEC and NFPA 70 406.8 (B)(2)(a).

Construction Requirements: The main housing is made of 3/16" thick injection-molded polycarbonate with UV-resistant paint. Receptacle and circuit breaker faceplates are made of 16-gauge 316L stainless steel with a UV-resistant coating.

Lighting: Each unit includes a non-metered 5-watt LED lighting assembly controlled by a photocell, providing at least one foot-candle of illumination at 15 feet.

Receptacles & Circuit Breakers: Receptacles are corrosion-resistant and locking, with individual thermal-magnetic circuit breakers rated at 10 kAIC. They are covered by a weatherproof, lockable door.

Solid-State Electric kWh Monitoring (Optional): The utility center can include solid-state electric monitors for kWh consumption, with wireless transmission capabilities.

Wiring & Terminal Block: The power pedestal is pre-wired with a copper stud lug compression terminal block assembly, supporting a maximum load of 140 amperes at 125/250VAC.

Telephone, Cable Television, Internet (Optional): The unit can provide connectors for telephone, cable TV, and internet, protected by a weatherproof cover.

Warranty: The main housing and parts have a seven-year limited lifetime warranty. Internal electrical components are covered by the manufacturer's warranty. Solid-state electric monitors have a three-year warranty.

Diagrams: The document includes wiring diagrams and dimensions for installation and maintenance purposes.

Catalog excerpts

Bayside Utility Center Model BU3050 General Specifications Marina Electrical Equipment, Inc. 100 Warwick Court Williamsburg, VA 23185 Toll Free: 1-855-258-3939 Fax: 1-757-258-3988

Open the catalog to page 1

ALL Bayside Utility Center POWER PEDESTALS SHALL MEET THE FOLLOWING SPECIFICATIONS: SECTION A: ACCEPTABLE MANUFACTURERS: Marina Electrical Equipment, Inc. SECTION B: GENERAL REQUIREMENTS 1. Utility center shall be listed and marked, tested and certified to conform to Standard ANSI/UL® 231 entitled "Power Outlets" and CAN/CSA Standard C22.2 No. 29 entitled "Panelboards and Enclosed Panelboards." 2. Shall be compliant with all sections of the latest edition of NFPA® 303, "Fire Protection Standards for Marinas and Boatyards." 3. Shall be compliant with NEC, and NFPA 70 406.8 (B)(2)(a), which states:...

Open the catalog to page 2

General Specifications - Bayside Utility Center BU3050 SECTION F: SOLID-STATE ELECTRIC kWh MONITORING (OPTIONAL) 1. Each utility center shall be equipped with solid-state electric monitors which output kilowatt-hours (kWh) consumption at each slip via an electromechanical counter and internally built wireless remote transmission. Wireless transmission shall be integral to the solid state electric monitor. Transmission via thrid-party vendors is not acceptable. 2. Each solid-state electric monitor shall be rated for 200 amperes, listed, marked and tested to conform to Standard ANSI-C12.1 3. Each...

Open the catalog to page 3

General Specifications - Bayside Utility Center BU3050 10.625" THERMAL / MAGNETIC TYPE CIRCUIT BREAKERS RECEPTACLES / CIRCUIT BREAKERS UNDER WEATHERPROOF COVER PHOTO CELL GROUND LUG MOUNTED TO STAINLESS STEEL HOUSING FRONT VIEW SIDE VIEW TYPICAL WIRING DIAGRAM PIVOTING FACEPLATE ASSEMBLY FOR SIMPLIFIED MAINTENANCE POLYCARBONATE HOUSING TERMINAL BLOCK CONDUIT ENTRY AREA SIDE VIEW w/ PIVOTING FACEPLATE FRONT VIEW w/ PIVOTING FACEPLATE BOTTOM VIEW PIVOT THE LIGHTING FACEPLATE UPWARD FOR ACCESS TO THE LIGHTING ASSEMBLY 2.50" STAINLESS STEEL MOUNTING BRACKET RECEPTACLES CIRCUIT BREAKERS INDENTATION...

Open the catalog to page 4

All Marina Electrical Equipment catalogs and brochures

MEE Catalog
16 Pages
Harbor Light SS
5 Pages
Harbor Light
5 Pages
Commodore SS
6 Pages