1. Catalogs
  2. Marflex
  3. Draining pump

Draining pump

Draining pump

Product catalog summary
Overview: The document provides technical specifications and details for a draining pump designed to completely empty tanks.
Design and Capacity: The pump is double-acting with a maximum capacity of 7 m³/h and can handle pressures up to 7 bar. It operates at a maximum of 13 strokes per minute.
Air Requirements: The pump consumes a maximum of 0.7 nm³/min of air, with a maximum air pressure of 10 bar.
Materials: Components in contact with cargo are made from AISI 316L stainless steel. The plunger rod is also AISI 316L, while the plunger rings and sealing are made from a PTFE compound.
Connections: The discharge, blow through/strip, and drain connections are all ¾” BSP, with the drain featuring a ball valve made from AISI 316L.
Sub-assemblies: Each pump includes a draining pump assembly, a foundation in the tank, a suction filter, and a stainless steel deck trunk measuring 270 mm.
See more

Catalog excerpts

Draining pump-1

Draining pump Draining pumps are designed to completely drain the tank, until the very last drop! Design Capacity/pressure Strokes Air consumption Max. air pressure : double acting : max. 7 m³/h – max. 7 bar : max. 13 strokes/min : max. 0.7 nm³/min : 10 bar Materials in contact with cargo Plunger rod Plunger rings Sealing Discharge connection Blow through/strip connection Drain : AISI 316L : AISI 316L : PTFE compound : PTFE compound : ¾” BSP : ¾” BSP : ¾” BSP ball valve - AISI 316L Each pump consists of the following sub-assemblies: • draining pump assembly • foundation in tank • suction filter • deck trunk (stainless steel, 270 mm)

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.