SIM100 switch indicator module
2Pages

{{requestButtons}}

Catalog excerpts

SIM100 switch indicator module - 1

Switch Indicator Module Maretron’s Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (e.g., heat, smoke, carbon monoxide, explosive vapor detectors), security systems (e.g., motion, vibration, glass break, door and port hole magnetic switches), and vessel monitoring equipment (e.g., valve closed/open, high water bilge). The SIM100 continually monitors these switch closure devices and broadcasts information over the NMEA 2000® network about the switch state so the crew can be alerted to potential conditions or problems that warrant further investigation. Advanced features of the SIM100 include the ability to detect whether or not power has been disconnected from the monitored device or if the signal wires have been disconnected due to either corrosion, tampering, or for any other reason (if the monitored device is so equiped). With the SIM100, you can rest assured that critical sensors are receiving power, signal wires are connected, and all the safety, security and vessel functions are under constant supervision. The following accessories are available for the SIM100: • Monitors and reports the running statuses of six independently connected devices • Can detect and report problems like opens and shorts in switch circuits PART NUMBER SIM100-01 Switch Indicator Module SH-449CSTE Smoke/Heat Detector BHW100 Water Detector Bilge High CO-CO1224T Carbon Monoxide (CO) Detector (Surface Mount White) VS-07.0HG Switch (7” Hg or 24kPa) Vacuum MS-1035 Switch Rectangular (Indoor) Magnetic MS-1085-N Magnetic Switch Rectangular (Outdoor) MS-1055-N Switch Cylinder (Indoor/Outdoor) Magnetic MS-1075 Switch Recessed (Indoor/Outdoor) Magnetic 10233 Water Flow Switch 1” FPT Cooling 10271 Cooling Water Flow Switch 1-1/2” FPT 10231 Water Flow Switch 2” FPT Cooling

Open the catalog to page 1
SIM100 switch indicator module - 2

NMEA 2000® Parameter Group Numbers Maritime Navigation and Radio Communication Equipment & Systems Electromagnetic Compatibility Default Rate 1 time/15 seconds and on switch change PGN List (Transmit and Receive) Product Information Configuration Information Response to Requested PGNs Binary Switch Bank Status NMEA Request/Command/Acknowledge Maretron Proprietary PGNs 126720 Operating Voltage Power Consumption Load Equivalence Number (LEN) Load Dump Protection Reverse Battery Protection Size Weight Including Flanges for Mounting Parameter Degree of Protection Maritime Navigation and Radio...

Open the catalog to page 2

All Maretron catalogs and brochures

  1. CLMD16

    2 Pages

  2. CLMD12

    2 Pages

  3. N2KBuilder

    1 Pages

  4. N2K ANALYZER

    1 Pages

  5. MBB200C

    2 Pages

  6. SMS100

    2 Pages

  7. DSM410

    2 Pages

  8. DSM250

    2 Pages

  9. MBB300C

    2 Pages

  10. FPM100

    2 Pages

  11. CLM100

    2 Pages

  12. SSC300

    2 Pages

  13. TSM800C

    2 Pages

  14. TSM1330C

    2 Pages

  15. N2KView

    2 Pages

Archived catalogs