Catalogs >
Maretron >
RAA100 rudder angle adapter

RAA100 rudder angle adapter
2Pages

Catalog excerpts

Rudder Angle Adapter Maretron’s RAA100 is used to adapt commercially available resistive rudder senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there are NMEA 2000® compatible displays such as the Maretron DSM150 or DSM250. The RAA100 is compatible with both the American standard (240-30 ohms) and European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms. You can also use the RAA100 with analog gauges at the same time as NMEA 2000® so you don’t have to give up existing analog gauges to enjoy the advantages of digitally networked information. The Maretron RAA100 has the following features: • • • • • • NMEA 2000® Interface Adapts American standard (240-30 ohm) resistive senders to NMEA 2000® Network Adapts European standard (10-180 ohm) resistive senders to NMEA 2000® Network Can be Calibrated for any Resistive Sender Ranging from 0-300 Ohms or 300-0 Ohms Three Point Electronic Calibration eliminates need for Mechanical Adjustment or Calibration Can be Used Standalone Without Analog Gauges PART NUMBER DESCRIPTION Rudder Angle Adapter

Open the catalog to page 1

Side View Top View Does Not Include Inaccuracies of Analog Gauge or Sender Worst Case (Resolution Better at High Resistance Values) American Standard Senders Standard Sender Types are User Selectable European Standard Senders Standard Sender Types are User Selectable Calibration Resistance Range Non-Standard Sender Calibration Electronic Calibration Eliminates need to mechanically adjust or calibrate Analog Gauge Support Can be Used With or Without Analog Gauges Maritime Navigation and Radio Communication Equipment & Systems Maritime Navigation and Radio Communication Equipment & Systems...

Open the catalog to page 2