Control Indoor Display The DSM800 is a dedicated touch screen that comes preloaded with Maretron's N2KView® vessel monitoring and control software. The N2KView® software allows you to configure as many favorite screens as you want with exactly the information you want to see. Although not suitable for outdoor applications, the DSM800 provides an extremely simple touch interface for observing and controlling critical systems from inside the vessel. The DSM800 is ruggedized for marine use and includes a solid state disk drive to withstand the pounding associated with waves. And since the DSM800 only dissipates 25 watts, there is no need for internal cooling fans that are noisy and wear out causing electronics to As an alternative to controlling the DSM800 through the touch screen, the DSM800 includes two USB ports for connecting keyboards, mice, or trackballs. The DSM800 also has an Ethernet port for communicating with an NMEA 2000® network through Maretron's Internet Protocol Gateway (IPG100). Although the DSM800 comes pre-installed with the N2KView® software, a separately purchased license plugged into the IPG100 is required (see IPG100 page for more details). The Ethernet port is also used for connecting Internet Protocol (IP) cameras for viewing within the N2KView® software. • 8" LED Backlit LCD Panel with Resistive Touch Screen • Solid State Disk Drive • Fanless cooling system Leading the way in NMEA open standards

Specifications Parameter Display Size Value Comment 8” LED Backlit LCD with Resistive Touch Screen Display Resolution 800x600 Display Brightness 300cd/m2 Contrast Ratio Pixel count 400:1 LCD Color 262K Viewing Angle 130° H 120° V Backlight MTBF 30,000 hours USB Ports Two USB 2.0 Ethernet Ports Two GbE Electrical Approvals Audio One Speaker Output Parameter Parameter Mechanical Value Operating Voltage 12 Volts Power Consumption (Maximum) Comment 25 Watts Parameter Overall Dimensions (DxWxH) Weight DC Voltage Value Comment 1.69” x 9.21” x 6.97” (43mm x 234mm x 177mm) 1.76 lbs (.8kg) Front Panel...