Alternating Current Monitor Maretron’s ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. ACM100 output information is then displayed with networked NMEA 2000® equipment such as the Maretron DSM150 or DSM250 dedicated display or with NMEA 2000® compatible software such as Maretron N2KView®. PART NUMBER DESCRIPTION Alternating Current (AC) Monitor 100 Amp AC Transducer with Cable 400 Amp AC Transducer with Cable The following accessories are available for the ACM100: M000630 • NMEA 2000® Interface • Waterproof Connectors • Sealed Waterproof Enclosure • Opto-Isolated from NMEA 2000® Eliminating Potential Ground Loops • Monitoring of busses carrying AC power and transmitting: - Voltage - Frequency • Monitoring AC Power Sources such as Utilities and Generators and transmitting: - Voltage - Apparent Power - Power Factor - Total Energy Imported - Real Power - Total Energy Exported - Reactive Power

Measurement Voltage Range Measurement Voltage Accuracy Measurement Current Range Measurement Current Accuracy Periodic Data PGNs 87.63mm 3.45” NMEA 2000® Parameter Group Numbers (PGNs) Response to Requested PGNs 51.6mm 2.03” Protocol PGNs Environmental Mechanical Electrical Maretron Proprietary PGNs AC Voltage 0 to 240 VAC With included current transformer (0 to 400A with optional transformer) With included current transformer NMEA 2000® Standard Maritime Navigation and Radio Communication Equipment & Systems Maritime Navigation and Radio Communication Equipment & Systems FCC and CE mark IEC...