General description Django 7.70
3Pages

STANDARD VERSION * General description of the equipement (excluding options) BUILDING / HARDWARE Hull - Infusion, fiberglass / polyester / sandwich with Soric - Sandwich structure - Crash box on the bow - White gelcoat outside - Interior white top-coat finish Deck / roof / cockpit - Build in fiberglass/polyester foam sandwich by infusion - White gelcoat outside - Interior white top-coat finish - Grip deck, with feetrests - 1 anchor box on the deck - Coamings - Great waterproof under deck cockpit locker Rudders - 2 units polyester and fiber glass with epoxy foam - 1 central helm with stick - JP3 autolining mechanism Keel - Fin-keel built in cast iron Deck hardware - 4 winches 20 ST, 1 winch handle (Harken) - 1 main sail track, traveller blocks, 2 cleats (Harken) - 2 genoa track, with travellers (Harken) - 2 genoa deck blocks (Harken) - Mainsheet with purchase system, 5 bits (Harken) - Kicking-strap system with 24 bits (Harken) - Adjustable Backstay with 24 bits (Harken) - 7 mast foot blocks (Harken) - Piano : 7 blockers, 2 cleats (Spinlock + Harken) - 2 panoramic fixed plexiglass, 2 opening hatches (Goïot) - Tiller steering with extension (Spinlock) - Chain plates (Wichard) Stainless steel - Internal tiller system (JP3) - Forestay chain plate - 2 backstay chain plate - 4 shroud chain-plate - 2 pushpits - 1 pulpit - 2 levels of side guard-rails, 3 levels of back guard-rails. - 6 stanchions - 6 mooring cleats (2 bow, 2 stern, 2 side) - 1 anchor support Rig - Standard mast electro polished aluminium installed on the deck, 2 levels of advanced crosstrees - Boom in electro polished aluminium - Asymmetric spinnaker flat deck rigging, manual positionning in & out/ * Plans, caractéristiques et données non contractuels. Les plans et les descriptions sont donnés à titre indicatif. Nos modèles peuvent subir, sans préavis, certaines modifications ou améliorations de série.

- Standing rigging in single-strand stainless steel (forestay- side shrouds), backstay - Complete running rigging : 2 reefing ropes, 3 polyester halyards, 1 mainsail sheet, 2 mainsail traveler ropes,outhaul, 2 genoa sheets, Spinnaker tack (dyneema), bobstay (dyneema), backstay system with blocks, boom vang with blocks. - Wind indicator windex -Version « cabine avant », inboard engine: 1 double berth at the front (2.00 x 1.60 m), 1 simple berth at the back port side( 1.90 x 1.50 m), 1 berths converted from bench seats (1.80 x 0.80 m) 1 technical / toilettes separated at the back starboard...

- 4 storages under the berth at the back. Cushions All berth and seats are filled with cushions made of high resilience foam, covered of Ferrari skai, specially treated against sea environment. Electricity -Electrical panel with 6 to 9 fuses with lights, depending on the numbers of circuits. - 2 spotlights in the saloon, 1 spotlight in the front cabin, 1 powerlight for the chart table, 1 Light for the kitchen area, 1 spotlight in the rear cabin. - 1 battery 70 A for service - electrical network - 1 batterie switch - 1 three-colour ligths on masthead - 1 Cigar lighter socket 12 V Plombing -...