Tender-Lift 1,000/1,500 extra low prole— ® • 1000 (454 ) and 1500 (680 ) lift capacities available. • Your choice of 105" or 120" boom lengths. (measured from the center of rotation to the end of the boom) • Choice of 350 manual rotation or 270 hydraulic rotation. • Tender-Lift drumless, hydraulic, tangle-free, winching system. • Smooth, nearly silent 21 foot (6.4 ) cable travel. • Hydraulic boom elevation. • Zero degree boom elevation lift capability.* • Completely waterproof, low voltage, hand-held remote control system. • Attractive cylindrical base styles are available as well as the standpipe model shown below. • Painted to match your yacht. • Power: 115 or 220 50/60 . • Manual rotation models feature a completely self-contained hydraulic power unit. 105" Hydraulic Boom Operating Angles 0-60— Boom Angle: Reach: (Hook to Center of Rotation) Lift Height:† (Hook to Deck) • Hydraulic rotation models feature a remote mounted hydraulic power unit which measures 12" x 9" x 18" [ x x ] (31 x 23 x 46 ) and includes 15' (4.6 ) of hydraulic hose and control wire from the bottom of the standpipe or base. We can also provide longer hose and wire runs to suit your specific installation requirements if neccessary. 120" Hydraulic Boom Operating Angles 0-60— Boom Angle: Reach: (Hook to Center of Rotation) Lift Height: † (Hook to Deck) * All 120" boom Tender-Lifts will lift 900 (410 ) at boom angles lower than 30 and the full rated capacity of the davit at boom angles greater than 30 9" (23 ) with Manual Rotation 12" (30 ) with Hydraulic Rotation 6-1/2" (17 )† The 4-1/2" (115 ) diameter pipe goes through to the next deck Minimum pipe length is 60" (152 ) 10" (25 ) † The lift heights shown above are for a hydraulic rotation extra low standpipe base assuming a minimal deck angle. Large deck angles will require a slightly higher base. A cylindrical base has no height minimum other than that required to compensate for the angle of the deck. Cylindrical bases can either be bolted to the deck structure using a 20" diameter exterior bolt-down flange or welded directly to an aluminum deck. 17" ( 43 ) with Manual Rotation 20" (51 ) with Hydraulic Rotation * All 105" boom Tender-Lifts will lift 1000 (455 ) at boom angles lower than 30 and the full rated capacity of the davit (1000 or 1500 ) at boom angles greater than 30 105" or 120" (267 or 305 ) Center of Rotation to the end of the boom Quality-Built Marine Equipment MarQuipt 3100 Southwest Tenth Street Pompano Beach, Florida 33069 (954) 957-8333 (954) 957-8330 .marquipt.com