1. Catalogs
  2. Mar Quipt
  3. DOUBLE TELESCOPIC

DOUBLE TELESCOPIC

DOUBLE TELESCOPIC

Product catalog summary
Overview: The document provides technical specifications and features of a Double Telescopic Crane designed for marine use, with a focus on its lift capacity, dimensions, and operational capabilities.
Specifications:
  • Lift Capacity: 33,000 ft/lbs with a standard lift capacity of 2,000 lbs (900 kg) when fully extended. Larger capacities are available.
  • Dimensions: Stows in half of its extended length, with a base diameter of 27 inches (69 cm) and an extended length of 209 inches (531 cm).
  • Rotation and Angles: Standard 270° rotation with an optional 360° rotation. Operating angles up to 70°.
  • Control System: Waterproof, low voltage, hand-held, proportional remote control system.
Operational Features:
  • Can telescope under full load and lift full capacity at zero degrees.
  • Available with bolt-down or weld-down cylindrical or pyramid base, and a standpipe model.
  • Finished to match yacht aesthetics.
Lift Height and Reach:
  • With Telescopic Section Retracted: At 0° boom angle, reach is 100 inches (254 cm) and lift height is 16 inches (41 cm). At 70°, reach is 28 inches (71 cm) and lift height is 128 inches (325 cm).
  • With Telescopic Section Extended: At 0° boom angle, reach is 200 inches (508 cm) and lift height is 16 inches (41 cm). At 70°, reach is 62 inches (157 cm) and lift height is 222 inches (564 cm).
Additional Information:
  • The Hydraulic Power Unit is remotely mounted in the yacht, not in the base.
  • 360° rotation increases base height.
  • Contact information for MarQuipt and European distributor RPM is provided for further inquiries.
See more

Catalog excerpts

DOUBLE TELESCOPIC-1

Double Telescopic Crane with 33,000 ⁄ lift capacity — • 2,000 (900 ) standard lift capacity fully extended. • Larger capacities available. • Custom lengths available. • Stows in half of its extended length. • Will telescope under full load. • Will lift full capacity at zero degrees. • Waterproof, low voltage, hand-held, proportional remote control system. Operating angles to 70. 70 rotation standard. 360 rotation available. Bolt-down or weld-down cylindrical or pyramid base. • Standpipe model available. • Finished to match your yacht. • • • • *Short cylindrical base shown below. The Hydraulic Power Unit is not located in the base but is remotely mounted in the yacht. 360 rotation will increase base height. Lift Height and Reach with the Telescopic Section Retracted— Lift Height:* (Hook to Deck) Boom Angle: Reach: (Hook to Center of Rotation) 0 Min. 30 70 Max. 100" (254 ) Max. 16" (41 ) Min. 87" (221 ) 75" (191 ) 28" (71 ) Min. 128" (325 ) Max. Lift Height and Reach with the Telescopic Section Extended— 0 Min. 30 70 Max. 200" (508 ) Max. 16" (41 ) Min. 173" (439 ) 125" (318 ) 62" (157 ) Min. 222" (564 ) Max. 30" ( 76 ) 13" ( 33 )* 43" ( 109 ) 20" (51 ) 109" (277 ) 129" (328 ) Stowed Overall 209" (531 ) Extended 12" ( 31 ) 5" (13 ) 27" (69 ) Base Diameter Quality-Built Marine Equipment 05/00 MarQuipt 3100 Southwest Tenth Street Pompano Beach, Florida 33069 (954) 957-8333 (954) 957-8330 .marquipt.com European Distributor— RPM .. Box 66 2410 Bodegraven, Holland +31 172 61 60 14 +31 172 61 60 72 *Add 11" of base and lift height for the shortest base that can contain the Hydraulic Power Unit. *Add 8" of base and lift height for a standpipe base.

 Open the catalog to page 1

All Mar Quipt catalogs and brochures

  1. Sun Lounges

    1  Page

  2. Step Across

    1  Page

  3. Elevators

    1  Page

  4. Docksteps

    1  Page

  5. Step Plates

    1  Page

  6. Sea Stair

    1  Page

  7. Sea Ladder

    1  Page

  8. Radar Arches

    1  Page

  9. MarQ6

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.