Marine Engine IMO Tier II and Tier III Programme 2016
212Pages

{{requestButtons}}

Catalog excerpts

Marine Engine IMO Tier II and Tier III Programme 2016 - 1

Marine Engine Engineering the Future - since 1758.

Open the catalog to page 1
Marine Engine IMO Tier II and Tier III Programme 2016 - 2

All data provided in this document is non-binding. This data serves informational purposes only and is especially not guaranteed in any way. Depending on the subsequent specific individual projects, the relevant data may be subject to changes and will be assessed and determined individually for each project. This will depend on the particular characteristics of each individual project, especially specific site and operational conditions. If this document is delivered in another language than English and doubts arise concerning the translation, the English text shall prevail.

Open the catalog to page 2
Marine Engine IMO Tier II and Tier III Programme 2016 - 3

MAN B&W Two-Stroke Propulsion Engines 4 - 103 Fuel oil and Gl dual fuel engines 16- 93 Alternative fuels Tier II and Tier III 94-103 MAN B&W Two-Stroke Propulsion Systems 104-111 MAN Four-Stroke Propulsion Engines 112 - 141 MAN Four-Stroke Marine GenSets 142 - 167 S.E.M.T. Pielstick Four-Stroke Propulsion Engines MAN Four-Stroke Propulsion Systems 172 - 181

Open the catalog to page 3
Marine Engine IMO Tier II and Tier III Programme 2016 - 5

Propulsion Engines

Open the catalog to page 5
Marine Engine IMO Tier II and Tier III Programme 2016 - 6

Available on your favourite mobile device. Get the Engine Programme app from App Store, Google Play or Windows St Engineering the Future - since 1758.

Open the catalog to page 6
Marine Engine IMO Tier II and Tier III Programme 2016 - 7

MAN B&W Two-Stroke Propulsion Engines MAN Diesel & Turbo Tier II and Tier III Engine Programme The two-stroke engines in this programme are either: Tier II engines complying with IMO Tier II Tier III engines complying with Tier II when operated in Tier II mode and with Tier III when operated in Tier III mode Engine Type Designation To ensure that the engine designation describes the engine with regard to the fuel injection concept and Tier III technologies applied, the engine type designation has been expanded to include these concepts as described below (full designation, see page 15):...

Open the catalog to page 7
Marine Engine IMO Tier II and Tier III Programme 2016 - 8

MAN B&W Two-Stroke Propulsion Engines CEAS and Turbocharger Selection (TCS) CEAS and TCS applications include all available Tier II, Tier III technologies and dual fuel options. These applications include all engines and variants available, and specifications can be further investigated with respect to finding the basic data essential for the design and dimensioning of a ship’s engine room (CEAS) and applicable turbochargers (TCS). CEAS and TCS are available at: www.marine.man.eu → Two-Stroke under CEAS Engine Calculations and Turbocharger Selection. In CEAS and TCS, all engines in this...

Open the catalog to page 8
Marine Engine IMO Tier II and Tier III Programme 2016 - 9

MAN B&W Two-Stroke Propulsion Engines Tolerances The energy efficiency design index (EEDI) has increased the focus on partload SFOC. We therefore offer the option of selecting the SFOC guarantee at a load point in the range between 50% and 100%. For part-load or lowload tuning methods the SFOC guarantee point is limited to the range 50% to 85%. All engine design criteria, e.g. heat load, bearing load and mechanical stresses on the construction, are defined at 100% load independent of the guarantee point selected. This means that turbocharger matching, engine adjustment and engine load...

Open the catalog to page 9
Marine Engine IMO Tier II and Tier III Programme 2016 - 10

MAN B&W Two-Stroke Propulsion Engines Fuel Consumption and Optimisation Possibilities for Tier II Engines Various optimisation possibilities for improved part-load and low-load SFOC are available for the MAN B&W type engines. High-load optimisation is for best possible SFOC at 100% engine load. Optimisation of SFOC in the part-load range (50-85%) or low-load range (25-70%) requires selection of a tuning method: EGB: exhaust gas bypass Also high-pressure tuning (HPT) is available on request for ME engines. The above tuning methods are available for all SMCR points, but cannot be combined....

Open the catalog to page 10
Marine Engine IMO Tier II and Tier III Programme 2016 - 11

MAN B&W Two-Stroke Propulsion Engines liquid fuel of L1 rating (SPOC = specific pilot oil consumption) and gas fuel (SGC = specific gas consumption). All types of GI engines can operate with fuel sharing, also referred to as specified dual fuel (SDF) operation, where the ratio between pilot fuel oil and gas fuel can be selected according to preset values. Guarantee figures for dual fuel engines are given for heat rate, which have the same tolerances as SFOC guarantees, i.e. see page 9. Heat rate is defined as follows [kJ/kWh] (example for methane as dual fuel): Heat rate (kJ/kWh) = SGC...

Open the catalog to page 11
Marine Engine IMO Tier II and Tier III Programme 2016 - 12

MAN B&W Two-Stroke Propulsion Engines EGR Two EGR matching concepts are available depending on engine type: EGR Concept TC cut-out matching for engines with bores >= 80 cm and more than one turbocharger applied Bypass matching for engines with bores <= 70 cm and one highefficiency turbocharger and for engines with bores <= 40 cm and one conventional efficiency turbocharger EGR operation applies to ME and ME-B engines, including engine types for dual fuel except GIE. SCR Two SCR concepts are available: SCR Concept High-pressure SCR with static mixer and SCR reactor installed upstream the...

Open the catalog to page 12
Marine Engine IMO Tier II and Tier III Programme 2016 - 13

Waste Heat Recovery Systems Waste heat can be economically recovered on engines with high-efficiency turbochargers by installing equipment for waste heat recovery (WHR) and matching the engine for WHR. WHR systems are available for both Tier II and Tier III engines on request. The following types of WHR systems have been approved for application: Power turbines with a power output equal to 3-5% of the engine shaft power at SMCR. Power turbines and steam turbines with a power output corresponding to 8-10% of the engine shaft power at SMCR. Steam turbine system – with a power output...

Open the catalog to page 13
Marine Engine IMO Tier II and Tier III Programme 2016 - 14

MAN B&W Two-Stroke Propulsion Engines Engine Dimensions The minimum length L min is stated from the aft end of the crankshaft to the fore end of the engine. L min Minimum length of engine A Cylinder distance B Bedplate width B1 Bedplate width at foot flange B2 Bedplate width at top flange C Crankshaft to underside of foot flange H1 Normal lifting procedure H 2 Reduced height lifting procedure H 3 Reduced height lifting procedure with MAN B&W double-jib crane H4 Normal lifting procedure with MAN B&W double-jib crane. Dry Masses Dry masses are stated in metric tonnes for engines with MAN...

Open the catalog to page 14
Marine Engine IMO Tier II and Tier III Programme 2016 - 15

MAN B&W Two-Stroke Propulsion Engines Engine Type Designation Fuel injection concept (blank) EGRBP EGRTC HPSCR LPSCR Tier ll only EGR with bypass matching EGR with TC cut-out matching High-pressure SCR Low-pressure SCR (blank) GI GIE LGIM LGIP Fuel oil only Gas injection methane Gas injection ethane Liquid gas injection methanol Liquid gas injection LPG Electronically controlled Exhaust valve controlled by camshaft ‘Green’ ultra long stroke Super long stroke Mark number Engine concept Stroke/bore ratio

Open the catalog to page 15

All MAN Energy Solutions - Marine catalogs and brochures

  1. CP pro peller

    16 Pages

  2. EEDI

    12 Pages

  3. LNG Shipping

    15 Pages

  4. ME Engines

    8 Pages

  5. EPROX

    2 Pages

  6. Cruise & Ferry

    17 Pages

  7. MAN Cryo

    12 Pages

  8. MAN L51/60DF

    2 Pages

  9. L27/38

    16 Pages

  10. L16/24

    16 Pages

  11. OBC Vessels

    4 Pages

  12. 48/60

    7 Pages