Exhibit with us
*mynauticexpo  
English
  1. Catalogs
  2. MAIBAK LED
  3. MAIBAK LED EN
video corpo

MAIBAK LED EN

MAIBAK LED EN
1 / 22 PagesView full catalog

MAIBAK LED EN

Product catalog summary
General Features
All models are designed for hull installation with an IP68 protection grade. Dimensions vary, with mounting holes ranging from Ø 6 mm to Ø 14 mm, and installation is secured using screws.
Electrical Specifications
The lights operate on constant voltage with power supplies ranging from 12 W to 29 W. They are not dimmable and have a power consumption of 10.5 - 30 Vdc, with absorption rates of 2A@12V or 1A@24V.
Materials
The body is made of synthetic material or stainless steel AISI 316L, with an interior resin and a tempered glass diffuser. The lights are not orientable, flexible, or equipped with a switch.
Photometric Data
Color temperatures range from warm white (4500°K) to cold white (5500 - 6500°K), with luminous flux ranging from 1000 lm to 3000 lm and efficacy between 110 lm/L and 125 lm/L. Available light colors include cold white and blue.
Certifications
Beam angles vary from 80° to 120° depending on the model.
Instructions for Assembly
1. Drill the appropriate hole size through the hull.
2. Apply marine-grade sealant to the stem and back perimeter of the light body.
3. Insert the light body into the hull and secure it with suitable fasteners.
4. Wire the lamp to a zinc hull anode.
5. Paint the metallic frame with antifouling paint.
6. Complete the electrical installation using the wiring diagram.
7. Contact the dealer or MAIBAKLED for installation on steel, aluminum, or cored fiberglass hulls.
8. Do not leave lights on for more than one minute when not submerged.
Connection Information
Use a supplied power supply and do not connect directly to mains (AC). The product can be connected in parallel.
See more

Catalog excerpts

MAIBAK LED EN-1

1000 Lumens cold white / blue GENERAL FEATURES SYNTHETIC MATERIAL/ STAINLESS STEEL AISI 316L TEMPERATED GLASS Mounting hole Fixing system ELECTRICAL SPECIFICATIONS Type of power Constant Voltage Light source Light Type Power supply PHOTOMETRIC DATA Color Temperature Luminous flux typical Power consumption Luminous efficacy cold white / blue Dimmable / Recommended dimmer Available light colours Side Beam www.maibak.com info@maiba

 Open the catalog to page 1
MAIBAK LED EN-2

SPECIFICATION FOR THE CONNECTION OF INDIVIDUAL UNIT Power Power Supply Operating Voltage CONNECTION INFORMATIONS WARNINGS Use your own supplied power supply. Do not connect the appliance directly to the mains (AC). This product can be connected in parallel. Drill a Ø 6 mm hole through the hull where the light’s center position will be. Apply marine grade sealant liberally to the stem and the back perimeter of the light body (as shown in the diagram), as well as around the screw holes. Insert the light body into the hull, feeding the stem through first. Press the light into the hull and twist...

 Open the catalog to page 2
MAIBAK LED EN-3

GENERAL FEATURES STAINLESS STEEL AISI 316L TEMPERATED GLASS Mounting hole Fixing system ELECTRICAL SPECIFICATIONS Type of power Constant Voltage Light source Light Type Power supply PHOTOMETRIC DATA Color Temperature Luminous flux typical Power consumption Luminous efficacy cold white / blue Dimmable / Recommended dimmer Available light colours Side Beam www.maibak.com info@maiba

 Open the catalog to page 3
MAIBAK LED EN-4

mod_M12 with PIN SPECIFICATION FOR THE CONNECTION OF INDIVIDUAL UNIT Power Power Supply Operating Voltage CONNECTION INFORMATIONS WARNINGS Use your own supplied power supply. Do not connect the appliance directly to the mains (AC). This product can be connected in parallel. SILICONE ADHESIVE SEALANT SILICONE ADHESIVE SEALANT Drill a Ø 14 mm hole through the hull where the light’s center position will be. Apply marine grade sealant liberally to the stem and the back perimeter of the light body (as shown in the diagram), as well as around the screw holes. Insert the light body into the hull, feeding...

 Open the catalog to page 4
MAIBAK LED EN-5

GENERAL FEATURES STAINLESS STEEL AISI 316L TEMPERATED GLASS Mounting hole Fixing system ELECTRICAL SPECIFICATIONS Type of power Constant Voltage Light source Light Type Power supply PHOTOMETRIC DATA Color Temperature Luminous flux typical Power consumption Luminous efficacy Dimmable / Recommended dimmer Available light colours Side Beam www.maibak.com info@maiba

 Open the catalog to page 5
MAIBAK LED EN-6

mod_M12 without PIN SPECIFICATION FOR THE CONNECTION OF INDIVIDUAL UNIT Power Power Supply Operating Voltage CONNECTION INFORMATIONS WARNINGS Use your own supplied power supply. Do not connect the appliance directly to the mains (AC). This product can be connected in parallel. Drill a 6-millimeter hole through the hull where the light’s center position will be. Apply marine grade sealant liberally to the stem and the back perimeter of the light body (as shown in the diagram), as well as around the screw holes. Insert the light body into the hull, feeding the stem through first. Press the light...

 Open the catalog to page 6
MAIBAK LED EN-7

GENERAL FEATURES SYNTHETIC MATERIAL STAINLESS STEEL AISI 316L TEMPERATED GLASS Mounting hole Fixing system ELECTRICAL SPECIFICATIONS Type of power Constant Voltage Light source Light Type Power supply PHOTOMETRIC DATA Color Temperature Luminous flux typical Power consumption Luminous efficacy Dimmable / Recommended dimmer Available light colours Side Beam www.maibak.com info@maib

 Open the catalog to page 7
MAIBAK LED EN-8

mod_M18_BOLLA SPECIFICATION FOR THE CONNECTION OF INDIVIDUAL UNIT Power Power Supply Operating Voltage CONNECTION INFORMATIONS WARNINGS Use your own supplied power supply. Do not connect the appliance directly to the mains (AC). This product can be connected in parallel. Drill a 6-millimeter hole through the hull where the light’s center position will be. Apply marine grade sealant liberally to the stem and the back perimeter of the light body (as shown in the diagram), as well as around the screw holes. Insert the light body into the hull, feeding the stem through first. Press the light into...

 Open the catalog to page 8
MAIBAK LED EN-9

3000 Lumens Cold white GENERAL FEATURES STAINLESS STEEL AISI 316L TEMPERATED GLASS Mounting hole Fixing system ELECTRICAL SPECIFICATIONS Type of power Constant Voltage Light source Light Type Power supply PHOTOMETRIC DATA Color Temperature Luminous flux typical Power consumption Luminous efficacy cold white / blue Dimmable / Recommended dimmer Available light colours Side Beam

 Open the catalog to page 9
MAIBAK LED EN-10

mod_M24 with PIN SPECIFICATION FOR THE CONNECTION OF INDIVIDUAL UNIT Power Power Supply Operating Voltage CONNECTION INFORMATIONS WARNINGS Use your own supplied power supply. Do not connect the appliance directly to the mains (AC). This product can be connected in parallel. SILICONE ADHESIVE SEALANT SILICONE ADHESIVE SEALANT Drill a Ø 14mm hole through the hull where the light’s center position will be. Apply marine grade sealant liberally to the stem and the back perimeter of the light body (as shown in the diagram), as well as around the screw holes. Insert the light body into the hull, feeding...

 Open the catalog to page 10
MAIBAK LED EN-11

3000 / 7500 Lumens Cold white GENERAL FEATURES TEMPERATED GLASS Mounting hole Fixing system STAINLESS STEEL AISI 316L ELECTRICAL SPECIFICATIONS Type of power Constant Voltage Light source Light Type Power supply PHOTOMETRIC DATA Color Temperature Luminous flux typical Power consumption Luminous efficacy cold white / blue Dimmable / Recommended dimmer Available light colours Side Beam www.maibak.com info@maibak

 Open the catalog to page 11
MAIBAK LED EN-12

mod_M24 without PIN SPECIFICATION FOR THE CONNECTION OF INDIVIDUAL UNIT Power Power Supply Operating Voltage CONNECTION INFORMATIONS WARNINGS Use your own supplied power supply. Do not connect the appliance directly to the mains (AC). This product can be connected in parallel. Drill a Ø 6mm hole through the hull where the light’s center position will be. Apply marine grade sealant liberally to the stem and the back perimeter of the light body (as shown in the diagram), as well as around the screw holes. Insert the light body into the hull, feeding the stem through first. Press the light into...

 Open the catalog to page 12

All MAIBAK LED catalogs and brochures

  1. Maibak Led M Nano Custom Ovald Models
    Maibak Led M Nano Custom Ovald Models

    11  Pages

  2. Brochure Maibak
    Brochure Maibak

    11  Pages

Archived catalogs

  1. MAIBAKLED Brochure
    MAIBAKLED Brochure

    9  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.