MAGNUM VENUS PRODUCTS ► UNIVERSAL PROPORTIONER SYSTEM The Universal Proportioner System supports a wide application range for Epoxy and Urethane laminating resins and coatings for a variety of industries. • Pneumatic shot size control • Heaters and heated hoses • Auto Level Control • Flow meters • Gravity feed containers • Pressure feed pumps • Innovator Plus PLC Control Box DESCRIPTION:► SYSTEM FEATURES The Universal Proportioner System is the latest mix/meter dispense system from Magnum Venus Products, which draws on technology that has been successfully used in MVP systems for over 50 years while incorporating many exciting new innovations. This system covers a wide application range for Epoxy and Urethane laminating resin and coatings. The air motor drives a heavy duty rocker arm linkage drive which drives two double acting reciprocating piston pumps. The resin side is fixed and the hardener side is adjustable, using an upper and lower screw/clamp block to set the ratio range. Fluid sections: UPLS-1000: 23.51 C.I./Cycle hardened seats or stainless steel UPLS-4600: 9.67 C.I. /Cycle hardened seats or stainless steel UPLS-2300: 4.82 C.I./Cycle stainless steel only UPLS-2400: 4.95 C.I./Cycle hardened cylinder only Ratio: With two of the same fluid section listed above: 1:1 to 3.1:1 by volume UPLS-1000 & UPLS-4600: 2.43:1 to 7.5:1 UPLS-1000 & UPLS-2300: 4.8:1 to 15:1 UPLS-4600 & UPLS-2300: 2:1 to 6:1 Powerhead: At 100 psi supply air, run at 60 psi, 40 cycle/min. (10"- 45 to 50 SCFM) (7"- 20 to 25 SCFM) 777 Emory Valley Road Oak Ridge, TN 37830 Knoxville, TN Area 100 Meco Lane Oak Ride, TN 37830 Manufacturing Knoxville, TN Area 14542 El Camino Ln., Suite B Lenoir City, TN 37771 Machine Shop Knoxville, TN Area 642 Barbrow Lane Knoxville, TN 37932 ► For more information about adding the Universal Proportioner System to your operation, or any of your adhesive dispensing needs, visit Magnum Venus Products at www.mvpind.com.