1. Catalogs
  2. Magnum Venus Products
  3. Patriot Pro Thermoplastic Resin Injection System

Patriot Pro Thermoplastic Resin Injection System

Patriot Pro Thermoplastic Resin Injection System

Patriot Pro Thermoplastic Resin Injection System

Product catalog summary
Features:
  • Fully Pneumatic, Automated Controls
  • Stroke Number Counter
  • Recirculation
  • Resin Gel Alarm (RGA)
  • Mold Pressure Guard (MPG)
  • Integrated Controls for Gun, IVx3/TAS/PPVS On/Off
  • Flush Controls
Automatic ProGun for Injection/Recirculation
Specifications:
  • Output Capabilities: Up to 7.5 lbs./min. (3.4 kg/min.) depending on materials & application
  • Catalyst: 1.5% to 4.5% by volume
  • Displacement: 2.45 in.3 (40.15 cc)/stroke or 4.90 in.3 (80.3 cc)/cycle
  • Pump Ratio: 7:1
  • Maximum Fluid Outlet Pressure: 1500 psi (76 bar, 7.6 MPa)
  • Maximum Air Input Pressure: 100 psi (7 bar, 0.7 MPa)
Contact Information:
  • Corp HQ: 200A Perimeter Park, Knoxville, TN 37922, Tel: (865) 321-8809, Fax: (865) 321-8811
  • MVP Technology Center: 1862 Ives Ave., Kent, WA 98032 USA, Tel: (253) 854-2660, Fax: (253) 854-1666
  • Email: [email protected], Web: www.mvpind.com
Authorized MVP Distributor:
Options:
  • Heater Control
  • Boom Mounting
Additional Information:

Patriot™ Pumping System with Pressure Pot Integrated Controls

© Copyright 2014 by Magnum Venus Products. All Rights Reserved. ML 1494 Rev. 0214

See more

Catalog excerpts

Patriot Pro Thermoplastic Resin Injection System-1

Closed Mold Division Thermoplastic Resin Injection System Manufacturing ■ Research & Development ■ Training • Consultation

 Open the catalog to page 1
Patriot Pro Thermoplastic Resin Injection System-2

Patriot™ Pro Thermoplastic Resin Injection System The Patriot™ Pro Thermoplastic Resin Injection System offers extremely low variances, and delivers power, versatility, pneumatic controls, automation and more.,.aII In one compact system. ■ Fully Pneumatic, Automated Controls ■ Stroke Number Counter ■ Mold Pressure Guard (MPG) Patriot™ Pumping System with Boom Mounting (3.4 kg/min.) depending on materials & application E-mail: [email protected] ■ Web: www.mvpind.com © Copyright 2014 by Magnum Venus Products. All Rights Reserved.

 Open the catalog to page 2

All Magnum Venus Products catalogs and brochures

  1. PRO RIDER

    1  Page

  2. ULTRAMAX™

    1  Page

Archived catalogs

  1. Micro Pro

    2  Pages

  2. APS System

    2  Pages

  3. DURAMAX GUN

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.