Specifications:
The document outlines the specifications for various models of the MVP technology systems. The ratio specifications for different models are provided: Two HVPC-2200 has a ratio of 1:1 to 3.7:1, VHPC-2200 & VHPC-3200-ADH has a ratio of 1.84:1 to 5.85:1, and VHPC-2200 & VHPC-4200 has a ratio of 4.15:1 to 13:1. The metering pumps consist of two VHPC-2200 fluid sections with a maximum stroke count of 61 or 1790 cc/min at a 1:1 ratio. Power requirements are specified as 120 Volt, 22 amp or 220 V single phase, 13.7 amp. Air requirements are 20 CFM at 100 psi of clean dry air. The tanks are 15-gallon gravity feed with a maximum fill load of 12 gallons each, and a 3-gallon pressure flush tank is included. Shipping dimensions are approximately 49 in. x 48 in. x 69 in., with a weight of 736 lbs.

Mini Link Hydraulic System:
Magnum Venus Plastech introduces the Mini Link Hydraulic System, ideal for Composite Pultrusion manufacturers. It uses a hydraulic motor and cylinder to drive the metering system, delivering a consistent mix/meter of materials at low flow rates. It is suitable for both low and high-pressure applications. The system features rapid pump reversal using two magnetic proximity switches and stainless steel construction for both material fluid sections. The fluid sections are adjustable for ratio variations. The Automatic 1:1 Pro Gun is used for mixing/dispensing materials with a pneumatic actuator for open/close positions.