1. Catalogs
  2. mafi Naturholzboden GmbH
  3. OAK COUNTRY CARVING CHECK I Product Data Sheet

OAK COUNTRY CARVING CHECK I Product Data Sheet

OAK COUNTRY CARVING CHECK I Product Data Sheet

OAK COUNTRY CARVING CHECK I Product Data Sheet

Product catalog summary
Technical Product Description: The document describes the characteristics of mafi natural wooden floors, highlighting the allowance of certain natural imperfections like putty-filled knots and cracks, while disallowing worm presence. Oak is the primary wood type, known for its durability and variety in appearance.
Wood Treatment: The wood is untreated and sourced from sustainably managed forests in Central Europe, with the exception of Siberian Larch from Russia. The philosophy emphasizes using the entire tree to minimize waste.
Type of Plank: The planks are constructed with a symmetric three-layer design, featuring a hardwood or conifer overlay and back layer, bonded with PVA adhesive. Dimensions available include 2400 x 240 x 16 and 2400 x 240 x 19.
Surface Treatment: Surfaces are finished with natural oils that are biodegradable and antiallergenic. Floors are oiled twice for optimal appearance and quality, with specific criteria for the installed surface to ensure warranty.
Underfloor Heating: Most floors are compatible with underfloor heating, except certain Larch varieties. The maximum surface temperature should not exceed 29°C.
Adhesive and Moisture Content: The floors use a casein adhesive free of formaldehyde and solvents. Moisture content is maintained between 6-8%, with exceptions for Vulcano floors.
Installation: Floors can be installed floatingly, with floor joists, or by gluing, following specific installation instructions.
Usage and Compliance: Floors comply with CE directives and are suitable for various traffic levels, from residential to commercial, with expert consultation recommended for the latter.
Important Advice: Variations in color and texture are natural, and samples may not perfectly match delivered products. Due diligence is required to ensure standards are met before installation.
Technical Data: The document provides technical specifications such as density, thermal resistance, hardness, fire certification, emission category, and anti-slip rate.
See more

Catalog excerpts

OAK COUNTRY CARVING CHECK I Product Data Sheet-1

Product Data Sheet Collection: OAK Country Carving Check I Product Code: TECHNICAL PRODUCT DESCRIPTION: Branches putty filled knots are permitted putty filled permitted, small open cracks and unfilled spots of a few mm are permitted crown cut and mirrors are permitted Color difference is a characteristic of natural wood WOOD TYPE: Oak - The Oak is surely one of the most hard wearing woods. Depending on sort, this hard wood offers surfaces free of knots or very lively with large knots and cracks as well as color varieties from almost white to almost black WOOD TREATMENT: untreated - The planks have not received a thermo treatment (Vulcano). The wood is obtained from carefully managed forests managed within Central Europe. The only exception is Sibirian Larch which is coming from Sibiria, Russia. The mafi philosophy ensures the complete tree is used and nothing is wasted. The resulting variations in lengths and width underline the character of a natural wooden floor. TYPE OF PLANK: Symmetric-three-layer-construction for panels - Symmetric-three-layer-construction with bevel on long side (depending on product: small, big, hand-planed) and all side tongue and groove for end to end laying. Overlay approx. 4 respectively 5mm (hardwood respectively conifer) consisting of selected quality wood. *Handplaned and milled surfaces may have a thinner top layer on partial areas. Intermediate softwood, bonded to the overlay and back layer with PVA adhesive Back layer approx. 4 respectively 5mm (hardwood respectively conifer) consisting of the same wood as the overlay Natural wooden floors made in AUSTRIA mafi Natural Wooden Floors Ltd. Utzweihstrasse 21+25 · A 5212 Schneegattern +43 · [0]7746 2711 - 0 · [email protected] · www.mafi.c

 Open the catalog to page 1
OAK COUNTRY CARVING CHECK I Product Data Sheet-2

SURFACE: The surface finishing of mafi natural wooden flooring is done exclusively with natural oils, which cure oxidatively. These oils consist of naturally renewable raw materials and are 100% biodegradable. Natural oils are harmless and generally antiallergenic. They provide a pleasant surface and a natural optical appearance of wood. To obtain the desired visual appearance and quality, each mafi natural wooden floor is oiled twice. This is the reason why we distinguish between: Production surface = professionally preoiled surface ex works Installed surface = professionally re-oiled surface...

 Open the catalog to page 2
OAK COUNTRY CARVING CHECK I Product Data Sheet-3

USAGE: All mafi natural wood floors comply with CE directives in accordance with ÖNORM EN 14342. P1 / P2 / O: P1 Suitable for low and medium traffic: bedroom, children’s room, lounge, etc. P2 Suitable for medium traffic and heavily frequented areas: kitchen, dining-room etc. O Suitable for commercially used zones. Attention! Only after consultation with an expert and compliance test of the actual area! IMPORTANT ADVICE: mafi natural wood floors are pure natural products and therefore unique. Differences in color and textures are because of different growing conditions of the single tree. Samples...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.