1. Catalogs
  2. mafi Naturholzboden GmbH
  3. OAK CLEAR CARVING LIPSO I Product Data Sheet

OAK CLEAR CARVING LIPSO I Product Data Sheet

OAK CLEAR CARVING LIPSO I Product Data Sheet

OAK CLEAR CARVING LIPSO I Product Data Sheet

Product catalog summary
Technical Product Description:
The document describes the specifications for mafi natural wooden floors, highlighting permissible features such as small knots and slight stress cracks, while disallowing cotter, worm, and discoloration. Oak is the primary wood type, known for its durability and variety in appearance.

Wood Treatment:
The wood is untreated and sourced from sustainably managed forests in Central Europe, with the exception of Siberian Larch from Russia. The philosophy emphasizes using the entire tree to minimize waste.

Type of Plank:
The planks are of a symmetric three-layer construction with a bevel on the long side and tongue and groove on all sides for easy installation. The overlay and back layer are made of selected quality wood.

Available Dimensions:
Dimensions include 2400 x 240 x 16 and 2400 x 240 x 19, under the CARVING collection, specifically the OAK Clear Carving Lipso I product.

Surface Treatment:
Surfaces are finished with natural oils that are biodegradable and antiallergenic. Floors are oiled twice for optimal appearance and quality. Available treatments include brushed with grey, natural, or white oil.

Underfloor Heating:
Most floors are compatible with underfloor heating, except for specific Larch products. The surface temperature should not exceed 29°C.

Adhesive:
The floors use a casein adhesive free of formaldehyde and solvents, ensuring safety and environmental friendliness.

Moisture Content:
The moisture content is maintained between 6-8%, with Vulcano floors at 2-5%, verified by calibrated analyzers.

Installation:
Floors can be installed floatingly, with floor joists, or by gluing, following specific installation instructions.

Usage:
Complies with CE directives, suitable for various traffic levels, from low to commercial use, with expert consultation recommended for commercial areas.

Important Advice:
As natural products, variations in color and texture are expected. Samples may not perfectly match delivered products.

Due Diligence:
Installation requires checking subsurface and product standards, including DIN standards for parquet and wooden floors.

Technical Data:
Density ranges from 0.43 to 0.96 g/cm³, thermal resistance from 0.07 to 0.17 m²*K/W, and hardness at 34 N/mm². Fire certification is CFL-s1, with an emission category of E1 and an anti-slip rate of R11.

Disclaimer:
The document notes that specifications are subject to change without notice, and previous versions are invalid as of 2014.
See more

Catalog excerpts

OAK CLEAR CARVING LIPSO I Product Data Sheet-1

Collection: Product: Product Code: CARVING OAK Clear Carving Lipso I C025 Branches Cracks Cotter Worm Discolourisation Grain Color difference small knots are permitted slight stress cracks are permitted not permitted not permitted not permitted crown cut is permitted, slight mirrors are permitted is a characteristic of natural wood WOOD TYPE: Oak - The Oak is surely one of the most hard wearing woods. Depending on sort, this hard wood offers surfaces free of knots or very lively with large knots and cracks as well as color varieties from almost white to almost black WOOD TREATMENT: untreated - The planks have not received a thermo treatment (Vulcano). The wood is obtained from carefully managed forests managed within Central Europe. The only exception is Sibirian Larch which is coming from Sibiria, Russia. The mafi philosophy ensures the complete tree is used and nothing is wasted. The resulting variations in lengths and width underline the character of a natural wooden floor. TYPE OF PLANK: Symmetric-three-layer-construction for panels - Symmetric-three-layer-construction with bevel on long side (depending on product: small, big, hand-planed) and all side tongue and groove for end to end laying. ■ Overlay approx. 4 respectively 5mm (hardwood respectively conifer) consisting of selected quality wood. *Hand-planed and milled surfaces may have a thinner top layer on partial areas. ■ Intermediate softwood, bonded to the overlay and back layer with PVA adhesive ■ Back layer approx. 4 respectively 5mm (hardwood respectively conifer) consisting of the same wood as the overlay Natural wooden floors made in AUSTRIA mafi Natural Wooden Floors Ltd. Utzweihstrasse 21+25 ■ A 5212 Schneegattern +43 ■ [0]7746 2711 - 0 ■ [email protected] ■ www.mafi.com

 Open the catalog to page 1
OAK CLEAR CARVING LIPSO I Product Data Sheet-2

SURFACE: The surface finishing of mafi natural wooden flooring is done exclusively with natural oils, which cure oxidatively. These oils consist of naturally renewable raw materials and are 100% biodegradable. Natural oils are harmless and generally antiallergenic. They provide a pleasant surface and a natural optical appearance of wood. To obtain the desired visual appearance and quality, each mafi natural wooden floor is oiled twice. This is the reason why we distinguish between: Production surface = professionally preoiled surface ex works Installed surface = professionally re-oiled surface...

 Open the catalog to page 2
OAK CLEAR CARVING LIPSO I Product Data Sheet-3

USAGE: All mafi natural wood floors comply with CE directives in accordance with ÖNORM EN 14342. P1 / P2 / O: P1 Suitable for low and medium traffic: bedroom, children’s room, lounge, etc. P2 Suitable for medium traffic and heavily frequented areas: kitchen, dining-room etc. O Suitable for commercially used zones. Attention! Only after consultation with an expert and compliance test of the actual area! IMPORTANT ADVICE: mafi natural wood floors are pure natural products and therefore unique. Differences in color and textures are because of different growing conditions of the single tree. Samples...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.