1. Catalogs
  2. mafi Naturholzboden GmbH
  3. NERO OAK VULCANO Product Data Sheet

NERO OAK VULCANO Product Data Sheet

NERO OAK VULCANO Product Data Sheet

NERO OAK VULCANO Product Data Sheet

Product catalog summary
Technical Product Description:
The product allows branches and knotholes up to 30mm filled with putty, and cracks up to 300mm. Cotter and worm are not permitted. Discoloration is considered a positive feature, and grain is permitted. Color differences are natural characteristics.

Wood Type:
Oak is used for its durability, offering surfaces from knot-free to those with large knots and cracks, with color variations from white to black.

Wood Treatment:
The Nero Vulcano treatment involves intensive thermo-treatment without chemicals, resulting in an almost black tone, providing an ecological alternative to tropical woods.

Type of Plank:
Symmetric three-layer construction with bevel on the long side and tongue and groove on all sides for end-to-end laying. The overlay and back layer are made of selected quality wood.

Available Dimensions:
Various dimensions are available, including 1800/2000/2400 x 150/180/230 x 16/19 mm.

Surface:
Finished with natural oils that are biodegradable and antiallergenic, providing a pleasant surface. Floors are oiled twice for quality assurance.

Available Surface Treatment:
Options include brushed/natural oil, brushed/white oil, heavily brushed/natural oil, and heavily brushed/white oil.

Underfloor Heating:
Most floors are suitable for underfloor heating, except for specific types. The surface temperature should not exceed 29°C.

Adhesive:
Uses casein adhesive, free of formaldehyde and solvents, safe for food packaging.

Moisture Content:
Maintained between 6-8%, with Vulcano floors at 2-5%.

Tongue and Groove:
Approximately 4mm wide, facilitating easy installation.

Installation:
Can be installed floatingly, with floor joists, or by gluing. Installation instructions should be followed.

Usage:
Complies with CE directives, suitable for low to medium traffic areas.

Important Advice:
Natural product variations in color and texture are expected.

Due Diligence:
Subsurface and goods must meet standards. A heating protocol is required for underfloor heating installations.

Technical Data:
Density: 0.43 - 0.96 g/cm³, Thermal resistance: 0.07 - 0.17 m²*K/W, Hardness: 34 N/mm², Fire certification: CFL-s1, Emission Category: E1, Anti Slip Rate: R11.

Disclaimer:
Previous versions of the data sheet are invalid. Changes may occur without notice. Valid from 2014.
See more

Catalog excerpts

NERO OAK VULCANO Product Data Sheet-1

Collection: Product: Product Code: BASIC Nero OAK Vulcano VNVU Branches Cracks Cotter Worm Discolourisation Grain Color difference permitted, knotholes up to 30mm are filled with putty end- and stress cracks up to 300mm not permitted not permitted positive feature permitted is a characteristic of natural wood WOOD TYPE: Oak - The Oak is surely one of the most hard wearing woods. Depending on sort, this hard wood offers surfaces free of knots or very lively with large knots and cracks as well as color varieties from almost white to almost black WOOD TREATMENT: nero vulcano - Nero Vulcano woods are intensively thermo treated. The woods are proverbially baked without chemical additives and therefore have an almost black tone across the entire material crosscut. Vulcano therefore represents a responsible and ecological alternative to tropical woods. TYPE OF PLANK: Symmetric-three-layer-construction for panels - Symmetric-three-layer-construction with bevel on long side (depending on product: small, big, hand-planed) and all side tongue and groove for end to end laying. ■ Overlay approx. 4 respectively 5mm (hardwood respectively conifer) consisting of selected quality wood. *Hand-planed and milled surfaces may have a thinner top layer on partial areas. ■ Intermediate softwood, bonded to the overlay and back layer with PVA adhesive ■ Back layer approx. 4 respectively 5mm (hardwood respectively conifer) consisting of the same wood as the overlay Natural wooden floors made in AUSTRIA mafi Natural Wooden Floors Ltd. Utzweihstrasse 21+25 ■ A 5212 Schneegattern +43 ■ [0]7746 2711 - 0 ■ [email protected] ■ www.mafi.com

 Open the catalog to page 1
NERO OAK VULCANO Product Data Sheet-2

SURFACE: The surface finishing of mafi natural wooden flooring is done exclusively with natural oils, which cure oxidatively. These oils consist of naturally renewable raw materials and are 100% biodegradable. Natural oils are harmless and generally antiallergenic. They provide a pleasant surface and a natural optical appearance of wood. To obtain the desired visual appearance and quality, each mafi natural wooden floor is oiled twice. This is the reason why we distinguish between: Production surface = professionally preoiled surface ex works Installed surface = professionally re-oiled surface...

 Open the catalog to page 2
NERO OAK VULCANO Product Data Sheet-3

AVAILABLE SURFACE TREATMENT: brushed / natural oil: brushed / white oil: heavily brushed / natural oil: heavily brushed / white oil: UNDERFLOOR HEATING: Nearly all mafi natural wooden floors are suitable for underfloor heating systems. Only exceptions are Larch Country, Larch Country Vulcano and Vulcano Rosso). Please have a look into the installation instructions for detailed information. With a room temperature of 21°C the floor´s surface temperature should be maximum 29°C. ADHESIVE (PVA): mafi natural wooden floors are exclusively glued together with casein adhesive. It is manufactured with...

 Open the catalog to page 3
NERO OAK VULCANO Product Data Sheet-4

The subsurface as well as the goods for installation has to be checked if the standards are kept to the following: ■ Parquet works DIN 18356; ■ Wooden floors: DIN EN 13489; ■ Tolerances in building construction DIN 18202 Each plank or panel has to be checked regarding proper quality prior to installation. The completion of a heating protocol is imperative if an installation on underfloor heating is realized. Density: Thermal resistance: Hardness (Brinel scale) Lindane and Pentachlorophenol Fire certification Emission Category Anti Slip Rate DISCLAIMER: With publication of this product data sheets...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.