III! LOPOLIGHT llll112,5°+ 112,5° COMBINED STARBOARD AND PORT SIDELIGHT, SINGLE, HORIZONTALLY MOUNTED 1 nautical mile 101 -003 (<12m / <39.4’) 2 nautical miles 201 -003 (12 - 50m / 39.4’ - 164’) This LED navigation light consists of two high-power LEDs that produces light in the specified angles utilizing special designed PMMA light guides. The precision machined 6082 aluminium housing with an anodized surface makes the light a rugged and durable housing for the LEDs and electronics contained within. The interior is completely filled with a special potting resin making it water- and vibration proof. Produced in our in-house manufacturing facility to meet and exceed exacting standards such as EN14744 and UL1104, under a quality management system continuously surveyed by Lloyds Register Quality Assurance. Each light is subjected to final testing for a minimum of 16 hours of continuous operation bringing the total test time beyond 24 hours. This navigation light is in compliance with the following standards: • COLREG72 • EN14744 • IEC 60945 • USCG (UL1104) Together with an appropriate Control & Monitoring System, such as Lopolight’s own NLC* this navigation light can form part of an IMO MSC 253(83), LY3 and LY4 compliant system. *) information found here: www.lopolight.com/NlcPanel LOPOLIGHT ApS • Bakkegaardsvej 513 • DK-3050 Humlebaek • Denmark [email protected] •Tel. +45 32485030 • Fax. +45 3258 305

III! LOPOLIGHT llll DATASHEET Technical specifications 101-003; Vessel size: <12m (<39.4’) Visibility: >1 nautical mile Intensity: >1,2cd Power consumption: 3,12 Watt; Current: 0,26A @12 VDC - 0,12A @24 VDC 201-003; Vessel size: 12m - 50m (39.4’ - 164’) Visibility: >2 nautical miles Intensity: >5,4cd Power consumption: 5,4 Watt; Current: 0,45A @12 VDC - 0,22A @24 VDC Operating voltage: 10 - 32 VDC Number of LEDs: 2 Light colour: Green / Red Operating temperature: -25°C to +55°C IP rating: IP68 Mounting: Horizontal, see K-Lock sheet for options Connection: 1 cable consisting of 2 x 0,5 mm2 leads,...

III! LOPOLIGHT llll DATASHEET LOPOLIGHT ApS • Bakkegaardsvej 513 • DK-3050 Humlebaek • Denmark [email protected] •Tel. +45 32485030 • Fax. +45 3258 3052

Note: The PE Plastic base is intended for fitting on site and can be either drilled for mounting screws from above. 6mm screws with nuts and washers are recommended for secure mounting. Center Line 101-003 1nm comb side light, HM, on a 400-038 PE std base Sergio 0 A3 101-003GA Bakkegaardsvej 513 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: DS/ISO 2768-f PHC 23-04-2018 DK-3050, Humlebaek 1:1 MATERIAL DESCRIPTION: (20µ) Silver anodized according to EN ISO 7599 Denmark (50µ) Black anodized according to MIL-A 8625F EN 6082, Acrylic, PE This Drawing, and the information within, is the property of...

101-003 1nm comb side light, HM, on a 400-036 Ultra Low profile base Sergio 0 A3 101-003IA Bakkegaardsvej 513 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 23-04-2018 DK-3050, Humlebaek DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20µ) Silver anodized according to EN ISO 7599 Denmark (50µ) Black anodized according to MIL-A 8625F Aluminum, Acrylic This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from. Lopolight reserves the right to change this drawing and assumes no liability for the information communicated...