video corpo

200-012ST
10Pages

{{requestButtons}}

Catalog excerpts

200-012ST - 1

III! LOPOLIGHT llll DATASHEET The double LED light consists of two (2) individual lights which can be activated separately. One is dedicated as the primary, the other the secondary. The precision machined 6082 aluminium housing with a hard coated anodized surface makes the light a rugged and durable housing for the LEDs and electronics contained within, and the polished PMMA lens delivers a clear light with colour ranging that is well within the standard for maritime use. Lastly all the interior is completely filled with a special potting resin making it water- and vibration proof before each light is subjected to final testing for no less than 16 hours of continuous operation bringing the total test period beyond 24 hours. Lopolight products are covered by a 5-year limited warranty. This warranty covers direct exchange of the malfunctioning product and is given under the assumption that the lights have been operated within the specifications of lights. LOPOLIGHT ApS • Bakkegaardsvej 513 • DK-3050 Humlebaek • Denmark info@lopolight.com •Tel. +45 32485030 • Fax. +45 3258 3052

Open the catalog to page 1
200-012ST - 2

III! LOPOLIGHT llll DATASHEET Technical specifications Vessel size: <50m (<164’) Visibility: >2 nautical miles Intensity: >5,4cd Mounting: Horizontal, see the K-Lock specifications sheet for options. Operating voltage: 10 - 32 V DC Number of LEDs: 28 per light, 56 in total Light colour: White Operating temperature: -25°C to +55°C IP rating: IP68 Power consumption; 2,6 Watt; Current @ 12 VDC: 0,22A - Current @ 24 VDC: 0,11A Connection: 2 M20x1.5 thread borings for cable glands located on the side, 2 M20x1.5 thread borings for cable glands located on the bottom (see drawing for...

Open the catalog to page 2
200-012ST - 3

Note: The PE Plastic base is intended for fitting on site and can be either drilled for mounting screws from above or drilled and tapped from below. 6mm machine screws with nuts and washers are recommended for secure mounting. 6 19,0 Rev1: 05/02/15 Construction alteration and Drawing number alteration. 200-012ST, 360 White - Anchor, Primary & Secondary, PE Base. 1 A3 200-012AH Friisen Ved Klaedebo 12 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 25-Sep-2014 DK-2970, Hoersholm DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20 ) Silver anodized according to EN ISO 7599 Denmark (50 ) Black anodized...

Open the catalog to page 3
200-012ST - 4

Rev1: 05/02/15 Construction alteration and Drawing number alteration. 200-012ST, 360 White - Anchor, Double Stack, 400-034 Promount, Cable Down. 1 A3 200-012BH Friisen Ved Klaedebo 12 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 25-Sep-2014 DK-2970, Hoersholm DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20 ) Silver anodized according to EN ISO 7599 Denmark (50 ) Black anodized according to MIL-A 8625F EN 6082 Alu, Acrylic. This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from. Lopolight reserves the...

Open the catalog to page 4
200-012ST - 5

Rev1: 05/02/15 Construction alteration and Drawing number alteration. 200-012ST, 360° White - Anchor, Double Stack, 400-034 Promount, Cable Side MATERIAL DESCRIPTION: CREATION DATE: (20p) Silver anodized according to EN ISO 7599 (50p) Black anodized according to MIL-A 8625F This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from. Lopolight reserves the right to change this drawing and assumes no liability for the information communicated herein. Use of dimensions and other information in this drawing is...

Open the catalog to page 5
200-012ST - 6

D(1:2) Mounting Hole 6,1 THRU Mounting Hole 6 14,0 Rev1: 05/02/15 Construction alteration and Drawing number alteration. 200-012ST, 360 White - Anchor, Double Stack, 400-034 Promount, 400-404 PE Base Plate, Cable Down. 1 A3 200-012DH Friisen Ved Klaedebo 12 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 25-Sep-2014 DK-2970, Hoersholm DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20 ) Silver anodized according to EN ISO 7599 Denmark (50 ) Black anodized according to MIL-A 8625F EN 6082 Alu, Acrylic. This Drawing, and the information within, is the property of Lopolight ApS and may not be used in...

Open the catalog to page 6
200-012ST - 7

White -Stack 360 Mounting Hole 06,1 THRU Mounting Hole 06,1 THRU 200-012ST, 360° White - Anchor, Double Stack, 400-034 Promount, 400-404 PE Base Plate, Cable Side MATERIAL DESCRIPTION: (20p) Silver anodized according to EN ISO 7599 (50p) Black anodized according to MIL-A 8625F This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from. Lopolight reserves the right to change this drawing and assumes no liability for the information communicated herein. Use of dimensions and other information in this drawing...

Open the catalog to page 7
200-012ST - 8

Rev1: 05/02/15 Construction alteration and Drawing number alteration. 200-012ST, 360 White - Anchor, Double Stack, 400-035 Promount, Cable Down. 1 A3 200-012FH Friisen Ved Klaedebo 12 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 25-Sep-2014 DK-2970, Hoersholm DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20 ) Silver anodized according to EN ISO 7599 Denmark (50 ) Black anodized according to MIL-A 8625F EN 6082 Alu, Acrylic. This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from. Lopolight reserves the...

Open the catalog to page 8
200-012ST - 9

Rev1: 05/02/15 Construction alteration and Drawing number alteration. 200-012ST, 360 White - Anchor, Double Stack, 400-035 Promount, 400-401 Alu Base Plate, Cable Down. 1 A3 200-012GH Friisen Ved Klaedebo 12 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 25-Sep-2014 DK-2970, Hoersholm DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20 ) Silver anodized according to EN ISO 7599 Denmark (50 ) Black anodized according to MIL-A 8625F EN 6082 Alu, Acrylic. This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from....

Open the catalog to page 9
200-012ST - 10

200-012ST, 360 White - Anchor, Primary & Secondary on a low profile base 0 A3 200-012HH Friisen Ved Klaedebo 12 REVIEWED BY: CREATION DATE: SCALE: TOLERANCES: 25-09-2014 DK-2970, Hoersholm DS/ISO 2768-f 1:1 MATERIAL DESCRIPTION: (20 ) Silver anodized according to EN ISO 7599 Denmark Alu EN 6082, Acrylic, PE (50 ) Black anodized according to MIL-A 8625F This Drawing, and the information within, is the property of Lopolight ApS and may not be used in any form without express permission there from. Lopolight reserves the right to change this drawing and assumes no liability for the information...

Open the catalog to page 10

All Lopolight catalogs and brochures

  1. X01-007-9S

    4 Pages

  2. X01-005

    5 Pages

  3. X01-004

    4 Pages

  4. X01-003

    5 Pages

  5. 200-016ST-B

    5 Pages

  6. 300-038

    9 Pages

  7. 300-038-B

    9 Pages

  8. 300-039

    3 Pages

  9. 300-039-B

    3 Pages

  10. 200-014ST

    10 Pages

  11. 200-013ST

    11 Pages

  12. 200-012ST-B

    10 Pages

  13. 300-118ST

    3 Pages

  14. 300-138

    8 Pages

  15. 300-139-CD

    4 Pages

  16. 200-010-B

    3 Pages

  17. 200-003-B

    10 Pages

  18. 100-004

    3 Pages

  19. 100-003

    10 Pages

Archived catalogs