901 Industrial Boulevard Naples, FL 34104 P: 800-321-LOOS (5667) - 239-643-LOOS (5667) F: 239-643-4558 - Email: [email protected] Website: www.loosnaples.com

The following pages list complete specifications for Loos & Co. Inc.’s broad line of wire rope terminals, fittings, cutters and swaging tools. How to order: Order by part number and sash number. It is helpful to give us the size of the wire rope the hardware is to fit. If you don’t know the exact size, send a short sample with your order. Order standard packaged quantities where applicable. If no standard package shows, we will supply any quantity from one piece up. For details regarding warranties, credit, payment terms, and minimum billing, see current Price List. Look for our trademarks to...

WIRE ROPE TERMINALS Plain Ball BA3 CORROSION RESISTANT STEEL Cable Diameter Double Shank Ball MS20663 CORROSION RESISTANT STEEL A Dia. Single Shank Ball MS20664 CORROSION RESISTANT STEEL Cable Dia. Loos & Co.,Inc. is a Qualified Producer (QPL) of MS Fittings and listed in QPL-781 & QPL-8878. We also manufacture swaging equipment capable of swaging to meet MIL-DTL-781, MIL-DTL-6117 and MIL-SAEAS-10081 *Denotes Stock Item. Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of cable it is to fit. 1

WIRE ROPE TERMINALS Terminal, Cylindrical ST24 Also known as "Stop Buttons," "Sleeves,", "Boeing Buttons," (Boeing Part No. BACT14A, Except ST24-8), these Stainless Steel Terminals have a multitude of uses. When properly applied, they will hold the breaking strength of the wire rope (except for 1x7 or 1x19 constructions). Cable Diameter Minimum breaking strength of ST24 Terminals equals minimum breaking strength of flexible carbon steel wire rope conforming to Specififcation LIL-DTL-83420. For swaging of these terminals, the dies for the next larger size AN-MS Standard Terminals are required....

WIRE ROPE TERMINALS Clevis Pins PI1 CORROSION RESISTANT STEEL CORROSION RESISTANT STEEL CaMS Part No. ble Dia. MS20668-2* 1/16 © Loos & Co.,Inc., 2015 901 Industrial Blvd., Naples FL 34104

WIRE ROPE TERMINALS Marine Eye EY1 SPECIFICATIONS CORROSION RESISTANT STEEL Stud MS21259 (AN666) CORROSION RESISTANT STEEL MS Part No. RH Thread LH Thread Be Sure to specify RH or LH Thread Cable Dia. When ordering: Specify Part No. and Diameter of cable the hardware is to fit. © Loos & Co.,Inc., 2015 901 Industrial Blvd., Naples FL 34104

WIRE ROPE TERMINALS Locking Stud MS21260 (AN669 / NAS650) CORROSION RESISTANT STEEL Cable Dia. MS Part No. RH Thread LH Thread *AN669 same as MS21260 but without slotted end * Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of cable hardware it is to fit. © Loos & Co.,Inc., 2015 901 Industrial Blvd., Naples FL 34104

Both Endi Left Hand thread indicator AVAILABLE IN BRASS, STEEL & ALUMINUM BY REQUEST. CflBieWARe® DIVISION 0 901 Industrial Blvd. rNdplK,FL 34104

WIRE ROPE TERMINALS MS21254C 17 4PH STAINLESS STEEL ALSO AVAILABLE IN 4130 HT-CADMIUM PLATED (Same as NAS648) (Replaces AN165) DASH No. direction of Thread RH NOTE: Use Dash -5 parts with 1/8” diameter wire rope MS21255C 17-4PH STAINLESS STEEL ALSO AVAILABLE IN 4130 HT CADMIUM PLATED Dash No. Min A C Direction of Cable Breaking Thread T +.010 M D J +.006 Thread Dia. Strength UNF-3A -.000 ±.031 ±.005 -.000 LB Diam. RH LH Max Min 2RS* 2LS* 2RL* 2LL* 3RS* 3LS* 3RL* 3LL* 5RS* 5LS* 5RL* 5LL* 6RS* 6LS* 6RL* 6LS* AN111 - CORROSION RESISTANT STEEL PART # Cable Diameter * Denotes Stock Item When ordering:...

WIRE ROPE TERMINALS Cold Rolled Steel Stainless Steel Zinc Plated Part No. AN thimbles come in either cold-rolled steel (zinc plated) or stainless steel (natural finish). Fit cable diameters from 1/16" to 3/8" to meet the most demanding marine, aircraft or industrial requirements. HEAVY DUTY STAINLESS STEEL THIMBLES EY18 (Type 316) Part No. Weight Each and Comparison Heavy Duty NOTE: EY18-3 will fit 1/16” Wire Rope, EY18-6 will fit 7/32” Wire Rope STANDARD GALVANIZED WIRE ROPE THIMBLES EY411 Pat No. * Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing...

HEAVY DUTY GALVANIZED WIRE CABieWARe® DIVISION

WIRE ROPE TERMINALS STAINLESS STEEL SAFETY/LOCKING WIRE Used for aircraft to secure all bolts, nuts, or hardware subject to vibrations. Better than a cotter pin, a thousand uses around the home, farm or factory. Always available from stock in these popular sizes and packages. TYPE 302/304 STAINLESS STEEL - CONDITION A MEETS MIL SPEC. MS20995 & GOVT. SPEC. QQW-423 Part No. * Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of cable hardware it is to fit. TOOL TO APPLY NET CLIPS PART NO....

WIRE ROPE TERMINALS MALLEABLE WIRE ROPE CLIPS/GALVANIZED CP2 Recommended To give Maximum Strength Part Number Wire rope clips of the type on this page are not to be used on a plastic coated cable without first stripping off plastic. Wire rope clips must be installed over bare cable only. Malleable, galvanized wire rope clips. Standard clips are designed for maximum holding strength. Heavy duty construction throughout. For in between sizes such as 5/32", 7/32", etc., use next larger size clip. WIRE ROPE CLIPS/STAINLESS CP7 Available in type 304 or 316 (Ref. dimensions in Inches except Nut Size)...

SPECIFICATIONS: CONFORMS TO MIL. SPEC. MS51844 TO FIT CABLE DIA. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Part No. Use Tool No. Wgt. Lbs. M/Pcs. Available in Copper Only ZINC PLATED COPPER OVAL SLEEVES COPPER OVAL Part No. Use Tool No. Wgt. Lbs....