catalog
1 / 44Pages

901 Industrial Boulevard Naples, FL 34104 P: 800-321-LOOS (5667) - 239-643-LOOS (5667) F: 239-643-4558 - Email: sales@loosnaples.com Website: www.loosnaples.com

The following pages list complete specifications for Loos & Co. Inc.’s broad line of wire rope terminals, fittings, cutters and swaging tools. How to order: Order by part number and sash number. It is helpful to give us the size of the wire rope the hardware is to fit. If you don’t know the exact size, send a short sample with your order. Order standard packaged quantities where applicable. If no standard package shows, we will supply any quantity from one piece up. For details regarding warranties, credit, payment terms, and minimum billing, see current Price List. Look for our trademarks...

Plain Ball BA3 CORROSION RESISTANT STEEL SPECIFICATIONS BA-3 Double Shank Ball MS20663 CORROSION RESISTANT STEEL SPECIFICATIONS MS20663 Single Shank Ball MS20664 CORROSION RESISTANT STEEL SPECIFICATIONS MS Part No. Loos & Co.,Inc. is a Qualified Producer (QPL) of MS Fittings and listed in QPL-781 & QPL-8878. We also manufacture swaging equipment capable of swaging to meet MIL-DTL-781, MIL-DTL-6117 and MIL-SAEAS-10081 ‘Denotes Stock Item. Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of...

Terminal, Cylindrical ST24 SPECIFICATIONS ST24 Also known as "Stop Buttons," "Sleeves,", "Boeing Buttons," (Boeing Part No. BACT14A, Except ST24-8), these Stainless Steel Terminals have a multitude of uses. When properly applied, they will hold the breaking strength of the wire rope (except for 1x7 or 1x19 constructions). * Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part Number and diameter of cable hardware it is to fit. © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104

Clevis Pins PI1 CORROSION RESISTANT STEEL SPECIFICATIONS Fork End MS20667 CORROSION RESISTANT STEEL SPECIFICATIONS © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104 CORROSION RESISTANT STEEL jf ;+ y MS-inns LSfifiJi who " FAK tU9liMJ-J5S-t « Em*J. irriw^oV'ipki.com Webvtr wsmU kowipiea.C’Srn isos nco CABLOUFlfier DIVISION

Marine Eye EY1 CORROSION RESISTANT STEEL SPECIFICATIONS EY1 Stud MS21259 (AN666) CORROSION RESISTANT STEEL Be Sure to specify RH or LH Thread SPECIFICATIONS MS Part No. RH Thread LH Thread When ordering: Specify Part No. and Diameter of cable the hardware is to fit. ISOS "CO CABiaUAfier DIVISION © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104

(AN669 / NAS650) CORROSION RESISTANT STEEL *AN669 same as MS21260 but without slotted end Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of cable hardware it is to fit. © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104

WIRE ROPE TERMINALSTurnbuckle Body MS21251 CLIP LOCKING (Same as NAS649) AVAILABLE IN BRASS, STEEL & ALUMINUM BY REQUEST SPECIFICATIONS ALSO AVAILABLE IN 4130 HT-CADMIUM PLATED SPECIFICATIONS MS21252C Dash No. direction of Thread * Denotes Stock Item When ordering: Specify Part No. and diameter of cable hardware it is to fit. © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104

WIRE ROPE TERMINALSMS21254C 17 4PH STAINLESS STEEL ALSO AVAILABLE IN 4130 HT-CADMIUM PLATED (Same as NAS648) (Replaces AN165) SPECIFICATIONS

WIRE ROPE TERMINALS AN100 THIMBLES AN thimbles come in either cold-rolled steel (zinc plated) or stainless steel (natural finish). Fit cable diameters from 1/16" to 3/8" to meet the most demanding marine, aircraft or industrial requirements. HEAVY DUTY STAINLESS STEEL THIMBLES EY18 NOTE: EY18-3 will fit 1/16" Wire Rope, EY18-6 will fit 7/32" Wire Rope STANDARD GALVANIZED WIRE ROPE THIMBLES EY411 * Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of cable hardware it is to fit. © Loos...

HEAVY DUTY GALVANIZED WIRE ROPE THIMBLES EY414 Part No. WIRE ROPE NET CLIP - CP3 NET CLIPS were designed specifically for use on steel cables. They are used by the U.S. Navy and Coast Guard to fabricate safety nets and have found wide acceptance whenever wire rope nets are needed. The one size available will accept "cross-overs" of 7x7 or 7x19 construction cable in unjacketed cable diameters of 5/32, 3/16, 7/32, and 1/4 . Net clips are available in Stainless Steel. Order by part number. © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104 ISOS P CDCABLOUFlfie5 DIVISION U 901...

STAINLESS STEEL SAFETY/LOCKING WIRE Used for aircraft to secure all bolts, nuts, or hardware subject to vibrations. Better than a cotter pin, a thousand uses around the home, farm or factory. Always available from stock in these popular sizes and packages. TYPE 302/304 STAINLESS STEEL - CONDITION A MEETS MIL SPEC. MS20995 & GOVT. SPEC. QQW-423 * Denotes Stock Item Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part No. and diameter of cable hardware it is to fit. TOOL TO APPLY NET CLIPSPART NO. #1-N • Weights 12 lbs. •...

Rugged Stainless Steel Saddles with grooved deep recess to hold cable securely. Stainless Steel U Bolt and Nuts. Use Clips as recommended above (under Malleable Clips) to give maximum strength. NOTE: The Nuts on these clips are metric sizes © Loos & Co., Inc. - 2017 901 Industrial Blvd., Naples FL 34104 U 901 !nduHr*fli Bh*il MiW jf ;+ pw.iniH-Loos cwfiJi -'iSM) MPax (U?l 64-MS53 » Eir*!. Into,jplts.com Webvic WWwJwingifJlHOHVTl

LOCOLOC® OVAL AND STOP SLEEVES (COPPER OVAL SLEEVES CONFORM TO MILITARY SPEC. MS51844.) Sleeves for eye, lap and stop sleeve splicing are available in either aluminum or copper in a wide variety of sizes ranging from 1/32" to 1/2" inclusive. All oval sleeves (copper or aluminum) are capable of supporting a greater load than the rated breaking strength of the cable to which they are attached when properly applied with LOCOLOC® HANDSWAGER to bare cable on 3x7, 7x7, 7x19 and 6x19 constructions. Stop sleeves capable of holding only 1/3 to 1/2 of the rated breaking strength of the cable to which...