*mynauticexpo

Catalogs
Loos & Co
2021 Catalog

2021 Catalog

Product catalog summary

Catalog Overview: The 2021 catalog from Loos & Co., Inc. details their range of wire rope terminals, fittings, cutters, and swaging tools. It includes specifications, ordering instructions, terms and conditions, product certifications, and highlights of specific products.

Specifications: Detailed specifications are provided for wire rope terminals, including dimensions, material types, and minimum breaking strengths. Products such as Plain Ball BA3, Double Shank Ball MS20663, and Single Shank Ball MS20664 are listed with measurements and load capacities.

Ordering Procedures: Orders should be placed by part number, with the wire rope size specified. If unknown, a sample should be sent. Standard package quantities are preferred, but any quantity can be supplied.

Terms and Conditions: Prices are subject to change, with invoices based on prevailing prices at shipment time. Payment terms are net 30 days, with a service charge for overdue balances. Freight is shipped collect, and minimum order values are specified for domestic and export orders.

Warranty and Claims: Products are guaranteed against manufacturing defects, with defective items replaced or adjusted if notified promptly. Claims for transit damage must be made within 15 days of delivery.

Certifications: Products meet various military and aerospace specifications, including MS, AN, NAS, and Boeing standards. Certifications are available upon request, with some incurring additional charges.

Product Highlights: The catalog features corrosion-resistant steel terminals and fittings, such as Stop Buttons, Sleeves, and Boeing Buttons, designed to hold the breaking strength of wire ropes. Specific products like Strap Eyes NAS1435-E and Strap Forks NAS1435-K are detailed with specifications.

Custom Orders: Custom manufactured orders are considered irrevocable after confirmation and may vary in quantity by +/- 10% of the ordered amount.

Swaging and Cutting Tools Overview: Detailed information on LOCOLOC® swaging and cutting tools, including pneumatic, hydraulic, and battery-powered options, is provided. Specifications, components, and usage instructions for each tool type are covered.

Pneumatic Swager: The #1-P Pneumatic Swager automates the swaging process for Locoloc® oval and stop sleeves, compatible with sizes from 1/16" to 7/32". It operates with a foot switch and requires a standard air supply of 140 psi, designed for copper and aluminum materials only.

Swaging Kits: Three main kits (AZP, CSS, MSS) contain a #1-SC hand swager, a C7 cable cutter, and various sleeves and thimbles, differing in materials such as aluminum, copper, and zinc-plated options.

Sleeve Gauges: LOCOLOC® sleeve gauges ensure proper swaging by using Go/No-Go slots to check sleeve compression, ensuring cable assembly holds the rated breaking strength.

Hydraulic Hand Swager: The #3 LOCOLOC® hand swager is a portable hydraulic tool for compressing sleeves on cables up to 1/2" in diameter, featuring a 180-degree swivel head and interchangeable dies.

Battery-Powered Swagers and Cutters: Models like SL-7NDK-R and SL-C7510 offer battery-powered swaging with interchangeable dies, one-hand operation, weather-resistant housing, and LED work lights. Battery-powered cable cutters like HC-S724H and SL-S720 provide efficient cutting with rotational heads and rapid advance.

Precision Cable Cutters: FELCO® cutters, such as C7, C9, and C12, are highlighted for precision and durability, suitable for various materials and applications.

Additional Accessories: Accessories like carrying cases, battery chargers, and replacement blades are mentioned for comprehensive tool maintenance and operation support.

Tools and Equipment Overview: Detailed specifications and descriptions of various tools and equipment, including cutters, pliers, cable strippers, tension gauges, and swaging machines, are provided, designed for industrial and marine environments.

Safety Wire Plier: The LOCOLOC® Safety Twist Plier (IW393) is a multifunctional tool combining a cutter, wire twister, and pliers, designed for aircraft and industrial applications.

Hydraulic Cable Cutters: Models like HC-16, HC-16PL, HC-20, and HC-24 are portable, lightweight, and durable, featuring a 180° rotational head and varying cutting capacities.

Simplex® Cable Strippers: The S-30C and S-15C are designed for high production wire stripping, capable of removing various insulation materials.

Tension Gauges: Tension gauges for cables and rods are suitable for marine and architectural applications, providing accurate tension measurements.

Hydraulic Swager: The #5-H LOCOLOC® Hydraulic Swager is a powerful tool for swaging cable assemblies, featuring a 10,000 PSI system and various swaging dies.

Manual Swaging Machines: Portable and bench-mounted manual swaging machines, including M1 and M2 models, are used for swaging MS type terminals onto cables.

Conclusion: Loos & Co., Inc. provides a comprehensive range of tools designed for durability and efficiency in industrial and marine applications, tailored to specific tasks for reliable performance and ease of use.

M2 Swaging Machine Overview: Detailed information about the LOCOLOC® M2 Swaging Machine, a bench-mounted, hand-powered device for swaging AN or MS type fittings on cables up to 3/8” diameter, is provided.

Specifications and Accessories: The M2 Swaging Machine includes a shipping case/bench, wrench, and handle extension, supporting various cable sizes with specific roll assemblies. Accessories include auxiliary adapters, terminal gauges, and a spring clip assembly.

Powered Swaging Machines: An optional power drive can be added to the Type II Swaging Machine, featuring a 1.5 HP motor, right angle gear reducer, and foot switch.

Installation and Usage: Instructions for mounting the machine on the bench and converting it to a powered version are provided, emphasizing proper fit and tolerance when swaging.

Quality Control: Loos & Co. maintains a quality control department conforming to ISO9001 and AS9100 standards, employing statistical process control and non-destructive testing.

Warranty and Recommendations: The warranty is restricted to the use of LOCOLOC® fittings, with recommendations to check wire rope diameter, fitting dimensions, and steel hardness before swaging.

Catalog excerpts

901 Industrial Boulevard Naples, FL 34104 P: 800-321-LOOS (5667) - 239-643-LOOS (5667) F: 239-643-4558 - Email: [email protected] Website: www.loosnaples.com

Open the catalog to page 1

BOS £CKCABLEWARE® DIVISION The following pages list complete specifications for Loos & Co., Inc.'s broad line of wire rope terminals, fittings, cutters, and swaging tools. How to order: Order by part number. It is helpful to give us the size of the wire rope the hardware is to fit. If you don't know the exact size, send a short sample with your order. Order standard packaged quantities where applicable. If no standard package shows, we will supply any quantity from one piece up. For details regarding warranties, credit, payment terms, and minimum billing, see page 3. Look for our trademarks to...

Open the catalog to page 2

TERMS AND CONDITIONS OF SALE 901 INDUSTRIAL BOULEVARD, NAPLES, FL 34104 USA/TEL: (239) 643-LOOS (5667) FAX: (239) 643-4558 TOLL FREE: 1-800-321-LOOS (5667) NOTE: Because of the fluctuations and uncertainties of primary metal markets, we may be forced to add surcharges to certain metals. Because of the rapidity of changes, these surcharges may be subject to immediate additional costs to our customers. Where it is possible we will do our outmost to advise you of surcharge increases in advance. WARRANTY: All Loos & Co., Inc. products are unconditionally guaranteed against manufacturing defects....

Open the catalog to page 3

Plain Ball BA3 CORROSION-RESISTANT STEEL SPECIFICATIONS BA-3 MS Part No. Loos & Co. BA3 same as Boeing BACT14B and NAS 494. Double Shank Ball MS20663 CORROSION-RESISTANT STEEL SPECIFICATIONS MS20663 MS Part No. Single Shank Ball MS20664 CORROSION-RESISTANT STEEL SPECIFICATIONS MS Part No. Loos & Co., Inc. is a Qualified Producer (QPL) of MS Fittings and listed in QPL-781 & QPL-8878. We also manufacture swaging equipment capable of swaging to meet MIL-DTL-781, MIL-DTL-6117, and MIL/SAE AS10081 © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104 ISISMCABIGWARE" DIVISION 901 Industrial...

Open the catalog to page 4

Terminal, Cylindrical ST24 SPECIFICATIONS CORROSION-RESISTANT STEEL ST24 Also known as "Stop Buttons," "Sleeves," "Boeing Buttons," (Boeing Part No. BACT14A, Except ST24-8), these stainless steel terminals have a multitude of uses. When properly applied, they will hold the breaking strength of the wire rope (except for 1x7 or 1x19 constructions). Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify Part Number and diameter of cable hardware it is to fit. 901 Industrial Blvd. Naples, FL 34104 (800) 321-LOOS (5667) | (239) 643-5667...

Open the catalog to page 5

WIRE ROPE TERMINALS Clevis Pins PI1 corros|on-res|stant steel SPECIFICATIONS Fork End MS20667 corros|on-res|stant steel SPECIFICATIONS Eye End MS20668 corros|on-res|stant steel SPECIFICATIONS 901 Industrial Blvd. Naples, FL 34104 (800) 321-LOOS (5667) | (239) 643-5667 Fax: (239) 643-4558 | [email protected] www.loosnaples.com © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104 ISOS &C0i CABLEWARE DIVISION

Open the catalog to page 6

Marine Eye EY1 CORROSION-RESISTANT STEEL (TYPE 316 STAINLESS STEEL) SPECIFICATIONS Stud MS21259 (AN666) CORROSION-RESISTANT STEEL Be Sure to specify RH or LH Thread SPECIFICATIONS MS Part No. RH Thread LH Thread When ordering: Specify part no., direction of thread, and diameter of cable the hardware is to fit. isosmCABL6WARE® DIVISION © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104

Open the catalog to page 7

AN669 same as MS21260 but without slotted end 901 Industrial Blvd. Naples, FL 34104 (800) 321-LOOS (5667) | (239) 643-5667 Fax: (239) 643-4558 | [email protected] www.loosnaples.com When ordering: Specify part no., direction of thread, and diameter of cable the hardware is to fit. © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104 5

Open the catalog to page 8

MS21251 WIRE ROPE TERMINALSTurnbuckle Body MS21251CLIP LOCKING (Same as NAS649) SPECIFICATIONS AVAILABLE IN BRASS, STEEL, & ALUMINUM BY REQUEST. 901 Industrial Blvd. Naples, FL 34104 (800) 321-LOOS (5667) | (239) 643-5667 Fax: (239) 643-4558 | [email protected] www.loosnaples.com When ordering: Specify part no., direction of thread, and diameter of cable the hardware is to fit. © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104

Open the catalog to page 9

WIRE ROPE TERMINALSMS21254C 17-4PH STAINLESS STEEL ALSO AVAILABLE IN 4130 HT CADMIUM-PLATED (Same as NAS648) (Replaces AN165) SPECIFICATIONS 901 Industrial Blvd. Naples, FL 34104 (800) 321-LOOS (5667) | (239) 643-5667 Fax: (239) 643-4558 | [email protected] www.loosnaples.com

Open the catalog to page 10

WIRE ROPE TERMINALSAN100 THIMBLES Cold Rolled Steel Zinc-Plated AN thimbles come in either cold-rolled steel (zinc-plated) or stainless steel (natural finish). Fit cable diameters from 1/16" to 3/8" to meet the most demanding marine, aircraft or industrial requirements. (Type 316 Stainless Steel) NOTE: EY18-3 will fit 1/16" wire rope, EY18-6 will fit 7/32" wire rope STANDARD GALVANIZED WIRE ROPE THIMBLES EY411 Pat No. Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify part no. and diameter of cable hardware it is to fit. © Loos...

Open the catalog to page 11

HEAVY-DUTY GALVANIZED WIRE ROPE THIMBLES EY414 Part No. WIRE ROPE NET CLIP - CP3 Net clips were designed specifically for use on steel cables. They are used by the U.S. Navy and Coast Guard to fabricate safety nets and have found wide acceptance whenever wire rope nets are needed. The one size available will accept "cross-overs" of 7x7 or 7x19 construction cable in unjacketed cable diameters of 5/32, 3/16, 7/32, and 1/4 . Net clips are available in stainless steel. Order by part number. © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104 ISISMCABL6WAR6 DIVISION 901 Industrial Blvd....

Open the catalog to page 12

NET CLIP TOOL PART NO. #1-N • Weight: 12 lbs. • Base Height: 4" • Base Diameter: 3.5" • Overall height 8" STAINLESS STEEL SAFETY/LOCKING WIRE Used for aircraft to secure all bolts, nuts, or hardware subject to vibrations. Better than a cotter pin, a thousand uses around the home, farm, or factory. Always available from stock in these popular sizes and packages. Non-stock items subject to reasonable delivery, depending on current manufacturing lead time. When ordering: Specify part no. and diameter of cable hardware it is to fit. © Loos & Co., Inc. - 2021 901 Industrial Blvd., Naples FL 34104

Open the catalog to page 13

All Loos & Co catalogs and brochures

Archived catalogs

2008 Catalogue
68 Pages