Lmg catalogue
8Pages

Marine Genset LMG series

In order to simplify its maintenance, the generator has been designed with all the controls and engine parts which require routine maintenance on only one side. It is sufficient to remove only one side of the canopy to carry out all maintenance operations. N O I S E L E S S ENE R GY The shield, built in fiberglass with neoprene clothing and cavity, reduces noticeably the noise. E A SY IN S TA L L ATIo n The gen-set is supplied with pre-mounted external rubber mounts and it is only necessary to fix them to the boat structure with special screws. For the electrical cable, sea water pipes and...

The LMG 4000/6000 are equipped with the Lombardini 15 LD, single-cylinder, four-stroke diesel engine, known for its compactness and lightness thanks to the crank case and cylinder head in aluminium and the air cooling system. A LTE R N ATO R On models LMG 4000/6000 the alternator is a syncronous type without brushes with the windings on the stator. The wave shape allows the safe utilization of the most sophisticated electronic equipment and a good input to the battery charger. cool i n g A characteristic of the LMG 4000/6000 is the generator set is the air-water cooling system with...

The models LMG 9000/14000/18000 are equipped with the FOCS (fully overhead controlling system) series engines, known for their compactness, low noise, low pollution emissions and absence of vibrations. A LTE R N ATO R The alternator is a synchronous type without brushes with the windings on the stator. Thanks to the AVR lsystem the delivered voltage is constant between zero and the rated output . cool i n g The FULL WATER cooling system includes both the engine and the alternator; the sea water cools, through a special circuit, the fresh water in the engine, the oil and the external walls...

Single phase ø8 mm fuel feeding line ø8 mm fuel feeding line ø40 mm Single phase ø16 mm siphon break connection ø16 mm siphon break connection ø16 mm water intake exhaust hose ø16 mm siphon break connection ø16 mm siphon break connection ø16 mm water intake exhaust hose Single phase 120 ø8 mm fuel feeding line ø8 mm fuel feeding line Single phase

QUICK SPECIFICS exhaust hose ► 08 mm fuel feeding Line K 08 mm fuel feeding Line 016 mm siphon break connection >016 mm siphon break connection QUICK SPECIFICS i mm fuel feeding Line i mm fueL feeding Line ^.016 mm siphon break connection ► 016 mm siphon break connection

ø8 mm fuel feeding line ø8 mm fuel feeding line ø16 mm siphon break connection ø16 mm siphon break connection ø20 mm water intake exhaust hose Technical specifications N° cilynders - Displacement Continuous mechanical power Engine model Starting and stop system Electrical, 12 V with remote control box Alternator type Synchronous, brushless, water-cooled Cooling Continuous electrical power Performance Water, through stainless steel heat exchanger jacket 4 kVA / 3,2 kW @ 3000 rpm 4 kVA / 3,2 kW @ 3600 rpm Single phase 230 V-50 Hz - Single phase 120 V-60 Hz Battery charger voltage Technical...

PRINTED IN ITALY  ED0053029680 REV.00  07/13 ENG Lombardini Marine is a division of Lombardini s.r.l.,part of Kohler Group. Lombardini has manufacturing facilities in Italy, Slovakia and India and sales subsidiaries in France, Germany, UK, Spain and Singapore. Kohler/Lombardini reserves the right to make modifications without prior notice. Via Cav. del lavoro A. Lombardini n° 2 42124 Reggio Emilia, Italia T. +39 0522 934598 F. +39 0522 935343 e-mail: sales@lombardinimarine.com