• STAINLESS STEEL (AISI304) • HYGIENIC AND EASY-TO-CLEAN CONSTRUCTION • HEAVY GAUGE STAINLESS STEEL-SQUARE 40X40/30X30 MM TUBULAR FRAMEWORK • ALSO AVAILABLE WITH 2.2 MM THICK DUOPLAN TOP • WIDE RANGE OF OPTIONALS The table top is constructed ofpolished 1.2 mm stainless steel. The rear edge is turned up 60 mm with a safe return for easy cleaning. The front and side edges are formed to a 15 mm anti-drip edge. The table top is also available in 2.2 mm Duoplan version, which is achieved by joining 2 layers of stainless steel sheet together under heat and pressure with a special glue. This leads to a very sturdy high impact resistant top with good sound-deadening properties. The sink bowl is a pressed seamless unit fitted with strainer and 1 1/2" waste and overflow. The corners are coved, for easy cleaning. The frame work is constructed ofheavy gauge stainless steel square tubes vertical 40x40 mm and horizontal 30x30 mm, to provide a very rigid construction. Wall fixing security brackets are included as standard. The frame is fitted with adjustable feet and on free standing tables floor mounting brackets are available to permanently locate the table. A wide range ofoptional extras is available to meet most individual requirements. For further specifications, please see overleaf and leaflet 10-399. E-mail [email protected]

TABLES WITH SINGLE SINK BE 50, 500X400X200 MM 60 Detail of marine foot: 40 1. Drain 1 1/2" 2. Overflow for hose Ø 24 mm, inner Dimensions in mm Table lenght mm Specification Table lenght mm Model number for tables with 1.2 mm s/s top Model number for tables with 2.2 mm s/s DUOPLAN top Bowl in the Bowl to the Bowl to the left middle right 10-371 Subject to changes without notice. The 2.2 mm thick DUOPLAN table top is constructed of 2 layers of stainless steel sheet bonded together to form a very strong and hygienic surface with very good sounddeadening properties.