Catalogs >
Loipart AB >
Dishwasher WTM165EA

Dishwasher WTM165EA
4Pages

Catalog excerpts

The Electrolux Dishwashing range is produced for customers with the highest conceivable demands for good efficiency, economy and ergonomics for dishwashing operation. The rack type dishwasher WTM165 has a capacity up to 165 racks per hour with 2 speeds. The range consists of 2 electrically heated models (feed from left or right) available with or without Energy Saving Device (ESD). EASY TO INSTALL • Solid 3mm square stainless steel sub-frame with bolt-together construction that can be delivered assembled or in modules to be connected on site. • Stainless steel wash pumps. • Brass inlet valves as standard. • All rear positioned water tubes in stainless steel • Only one cable for electrical connection. • Electrical and water connections centralized in one area. • Service from the front and from the side. • Prearrangements for automatic detergent dispenser, energy management device and HACCP implementation. FUNCTIONAL ZONES • Power wash zone where all the soil is removed with Maximum Water contact wash arms. • Rinse area equipped with the DUO-rinse system • Atmospheric boiler combined with the rinse booster pump for perfect rinsing performances in terms of sanitation, energy saving, independence from the water pressure on the network. • Incorporates non-return (air gap class A) valve. • Can be equipped with a drying zone for fast and efficient drying (optional extra). EASY TO CLEAN AND MAINTAIN • The rinse & wash tank is pressed with completely rounded corners and sloping base. • Smooth surfaces. Main internal components made in 304 AISI stainless steel as well as the external panels. • Easy removable wash arms and double tank filter (flat and deep box). • Height adjustable stainless steel feet. • Self-draining wash pumps provide maximum hygiene. • Hinged flap for easy access to the energy saving condenser unit. • Large balanced inspection doors for easy access to wash area. • Self-cleaning cycle in pre-wash, wash & rinse zones. EASY TO USE • Automatic start/stop function. • Simple electric control panel. • Counter balanced door with safety switch and easy to grip handle. • Built-in rinse water heater to increase the temperature of the final rinse water. • Electronic control panel with autodiagnostic check control. EASY ON THE ENVIRONMENT • 35mm thickness foam injection insulated doors • 98% recyclable by weight. • CFC free packaging. • Low noise level <70dBA. For further specifications and optional extras, please see overleaf.

Open the catalog to page 1

DISHWASHER WTM165 – FEED FROM LEFT Dimensions mm 560 1. Main switch 2. Mains supply connection 3. Hot water connection, temperature ca 50°C , ISO 228/1 DN 20 (G 3/4"), pressure 150–700 kPa (1.5-7 bar) at 0.3 l/sec. 4. Cold water connection, temperature ca15°C , ISO 228/1 DN 20 (G 3/4"), pressure 150–700 kPa (1.5-7 bar) at 0.3 l/sec. 5. Drain outlet 1 1/2" M, flow rate 120 l/min. Must be connected with 50 mm air gap to floor gully, designed for flow of 3 l/sec. 6. Condensation outlet 7. Detergent connection 8. Detergent probe 9. Equipotentional screw DISHWASHER WTM165 – FEED FROM RIGHT NOTE!...

Open the catalog to page 2

DISHWASHER WTM165 WTM165 – FEED FROM LEFT C Dishwasher, washing module Dishwasher, rinse module Condenser unit/ESD - if ordered Drying zone – optional Specification – electrically heated models Capacity/h 1st speed/2ndspeed Capacity/litres wash tank Water flow litres/h Wash pump/ duo rinse pump OPTIONAL EXTRAS: Model Drying zone ADT 600– feed from right, see below Drying zone ADT 600– feed from left, see below Drying zone ADT 900– feed from righ, see below Drying zone ADT 900– feed from left, see below Drain kit for Modular + Compact rack type 1. Drain outlet 1 1/2" M 2. Pair of marine legs...

Open the catalog to page 3