Deep pump aerator
1Pages

Deep pump aerator ... the solution for oxygen enrichment in deeper waters and lakes. Draws the water from the deeper pond zones to the surface, enriches it with oxygen and mixes it with water at the surface! This pump also mixes colder deep water and warmer surface water. The pump component can be hung beneath the float down to a depth of 5 m. All that is required is a normal buried drain pipe of nominal 150 mm diameter. This pipe is available in different lengths, and can be cut according to the existing water depth. Simply attach one end of the pipe on the pump outlet, and the other to the underside of the float using the pipe clamps provided. For additional security, the pump is attached to the float by a special steel wire rope (included). The deep pump aerator draws water from deep to the surface. The way the water is ejected at the water surface depends on the outlet type preferred, selected at the time of ordering. The simple pipe outlet gives a directional jet. As an alternative, if the conical deflector type is chosen, the result is a 'mushroom'-sha-ped fountain pattern, like that produced by the Aqua-Pilz submersible. The pump used for this aerator is the same as the Pipe Pump L3. For technical specification, please refer to the Pipe Pump details on page 24.