p r o d u c t d ata s h e e t ACTUATOR LA35 Features: • 12 / 24V DC permanent magnet motor • Thrust up to 6000 N in push and up to 4000 N in pull • Heavy duty aluminum housing for harsh conditions • Elegant and compact design with small installation dimensions • Protection class: IP66 for outdoor use (dynamic), furthermore the actuator can be washed down by a high pressure cleaner (IP69K – static) • Integrated brake, high self-lock ability • Built-in limit switches • Strong wear and corrosion resistant stainless steel inner tube • Noise level 48dB(A); measuring method DS/EN ISO 3746, actuator not loaded Options: • Hall effect sensor • Potential free signal switches for detecting inner and outer position • Long life absolute feedback • Easy to use interface – with integrated power electronics for direct PLC connection • Large variety of back fixtures and piston rod eyes • Exchangeable cables in different lengths • Safety nut in push Usage: • Duty cycle: Max 10% or 2 minutes continuous use followed by 18 minutes not in use, at an ambient temperature of 25º C • Ambient temperature -25°C to +60°C The LA35 is a member of the TECHLINE® Family it is characterised by it’s robust design allowing the actuator to be used in harsh conditions. The LA35 is designed to meet the challenge, based on the philosophy that it must be able to operate under extreme conditions. The actuator is ideal for mobile “off-highway” equipment such as agricultural, forestry and construction machines. Furthermore the LA35 actuator is a very quiet and powerful actuator designed for a variety of applications both indoor and outdoor. iFLEX is a descriptive term under which every TECHLINE® actuator with built-in intelligence is unified. For more information on iFLEX, please see: www.linak.com/techline

Stroke length v’s load: Dimensions: 10.2 10.2 Installation dimension Stroke =<300 = 200 + Stroke Stroke >300 = 250 + Stroke Minimum installation dimension = 300 mm 29 17 13 27 26 11 17 6.1 6.1 54 22 153 116 27 233 83.5 Drawing no.: 0359012 Back fixtures: Type 1, 3, A Type 2, 4, B

Connection diagrams: Basic actuator Fig.1 : 35xxxxx00xxxxx BROWN M BLUE Actuator with potential free switches Fig.2 : 35xxxxx10xxxxx BROWN M BLUE RED YELLOW IN OUT GREEN Actuator with potential free switches and relative positioning Fig.3 : 35xxxxx0Hxxxxx & 35xxxxx1Hxxxxx M BROWN BLUE IN OUT RED YELLOW GREEN SIGNAL WHITE VIOLET BLACK

Actuator with potential free switches and absolute positioning Fig.4 : 35xxxxx0Axxxxx & 35xxxxx1Axxxxx M BROWN BLUE IN OUT RED YELLOW GREEN SIGNAL WHITE VIOLET BLACK Actuator with PLC-option Fig.5 : 35xxxxx20xxxxx & 35xxxxx2Hxxxxx & 35xxxxx2Axxxxx M BROWN 12/24V DC BLUE PLC OUTPUT BLACK RED YELLOW GREEN WHITE VIOLET INWARDS OUTWARDS ENDSTOP IN ENDSTOP OUT READY DIGITAL/ANALOG

Speed and current curves: LA35 12V Motor speed v's load LA35 24V Motor current v's load LA35 24V Motor speed v's load

The LA35 is tested according to the following standards: Test Specification Comment Cold test EN60068-2-1 (Ab) EN60068-2-1 (Ad) Storage at low temperature: -40°C Operating at low temperature: -30°C Dry heat EN60068-2-2 (Bb) EN60068-2-2 (Bd) Storage at high temperature: +90°C Operating at high temperature: +60°C Change of temperature EN60068-2-14 (Na) EN60068-2-14 (Nb) Rapid change in temperature: +100°C to -30°C Controlled change of temperature: +70°C to -30°C Damp heat EN60068-2-30 (Db) EN60068-2-3 (Ca) Damp heat, Cyclic: Relative humidity 93 - 98 %, High +55°C, low +25°C Damp heat, Steady:...