Linear Actuator LA29
4Pages

p r o d u c t d ata s h e e t ACTUATOR LA29 Features: • 24 V DC permanent magnet motor • Thrust up to 6000 N • Duty cycle: Max 10% or 2 minutes continuous use followed by 18 minutes not in use. • Ambient temperature: +5° to + 40°C • High-strength plastic housing protecting motor and gears • Elegant and compact design with very small installation dimensions • Colour: black plastic parts and natural anodized aluminium profile. • 2.4 m straight cable with 6.3 mm DIN-plug. • Built-in limit switches (not adjustable) • Metal back fixture • Flexible back fixture (similar to LA31 "L2 version" and LA31 with quick release). • The flexible back fixture enables up to 4000 N in pull. • The LA29 actuator is approved according to EN 60335-1 and will also be approved according to UL 73 Options: • Brake that increases the self-locking ability • Reed switch (8 pulses per spindle revolution) for exact positioning of memory control and compatible with CB9 with microprocessor • Cables according to ordering example The LA29 actuator is the latest HOMELINE® actuator. The LA29 is specially made for domestic applications. The actuator has a very short installation dimension as the distance between the two fixing points is small when the actuator is retracted and at the same time independent of the stroke length. This feature makes the actuator ideal as a lifting actuator for self-lifting recliners. Another special feature here is the flexible back fixture, which can adapt misalignments in e.g. a recliner application. The LA29 is compatible with LINAK's other HOMELINE® products such as control boxes CB7, CB8, CB9, CB12 and controls HB10, HB40, HB60 and HB70. Handsets HB41 and HB42 have special front covers for recliners (HB41 article no. 0041098 and HB42 article no. 0042130).

Technical specifications: (with an ambient temperature of 22° C) The above measurements with the standard motor are made together with the CB9AE control box. Measurements with the fast motor are made with * LINAK control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s), when the actuator(s) are not running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) are not connected to a LINAK control box, the terminals of the motor must be short-circuited to achieve the self-lock ability of the actuator. **...

Flexible back fixtures: LA29 3mm pitch current v's load LA29 3mm pitch speed v's load LA29 4mm pitch current v's load LA29 4mm pitch speed v's load

Copyright © LINAK 2012.12 MA M9-02-046-i . Chapter 5.1 Curves: Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for...