Actuator LA31 Data sheet LINAKE3 LINAK.COM/DESKLINE WE IMPROVE YOUR LIFE

The LA31 actuator is a very quiet and powerful linear actuator desigend for a variety of desk applications ranging from kitchen applications to industrial table purposes. The LA31 actuator fits into very narrow places, as it is very compact. The LA31 is designed for use together with the DESKLINE control boxes CBD4, CBD5 and CBD6 and it either can work as a single actuator or used in parallel drive. Features: • 12 V DC motor • Thrust up to 3500 N • Small built-in dimension with short piston rod eye and back fixture • High-strength plastic housing protects motor and gears • Colour: black • Straight...

Dimensions of LA31 in combination with CBD4: LA31 in combination with CBD4 needs to be initialized at starting up. The stroke length is therefore reduced and the installation dimension increased. The values are the same for the different spindle types. CBD4 with a 200 W transformer: • Up to 2 x LA31 can be connected. The speed is constant within the working range. • CBD4 with a 300 W transformer: Up to 4 LA31 can be connected. The speed is constant within the working range. Back fixtures:

Dimensions LA31 INSTALLATION = STROKE + ADDITION Forward outlet Additions to the installation dimensions with different combinations of piston rod eyes and back fixtures to LA31. LA31 Standard Stroke length > 115 mm Stroke length > 115 mm S = Stroke length For stroke lengths of 115 mm or less the installation dimension will be 288 mm, for actuators with back fixture 1/2 and piston rod eye type 0. Min. installation dimension with back fixture 3/4 and piston rod eye 4, is 254 mm.

LA31 12V motor with CBD4/5/6 Load (N) Cables: IP degree: Motor type: Stroke length: Brake: Spindle: Colour: Position: Piston rod eye: Back fixture: S = Mini fit cable 0.25m (black) forward outlet for CBD4 (always with hall) 0 = Standard 5 = 12VDC Standard motor for CBD4/5/6 (always with cable type S) XXX = Max 500 mm 0 = Standard (none) 1 = Brake push 0 = Standard (none) 1 = Safety Nut - = Black H = Hall 0 = Standard with slot (031339) 1 = Standard solid 2 = Standard painted 3 = Standard gold chrom 4 = Standard for DL2 1 = Standard with 6.1 mm slot, 010.1mm hole (031189-B) 2 = Standard with 6.1...

Copyright © LINAK 2017.07 MA M9-02-057-E . Chapter 7.1 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons...