LA12
17Pages

Actuator LA12 Data sheet LINAKE3 LINAK.COM/TECHLINE WE IMPROVE YOUR LIFE

Thanks to its small size and outstanding performance, the actuator LA12 provides a practical and cost-effective alternative to small-scale traditional hydraulic and pneumatic systems. The LA12 is ideal for applications requiring short linear movements. After many years on the market, the actuator LA12 demonstrated that it is a very reliable and robust actuator that can handle almost any situation and challenge. Features: • 12 or 24 V DC permanent magnetic motor • Max. thrust 750 N • Max. speed up to 40 mm/sec. depending on load and spindle pitch • Stroke length from 19 to 130mm • Compact...

Actuator with:

Specifications Motor: Permanent magnet motor 12 or 24V * High-strength plastic housing Spindle part: Acme spindle: Trapezoidal spindle with high efficiency Temperature range: Storage temperature: Weather protection: Noise level: 55-57dB (A), measuring method DS/EN ISO 3743-1 actuator not loaded The LA12 IC is compatible with SMPS-T160 (For combination possibilities, please see the User Manual for SMPS-T160) Be aware of the following two symbols throughout this product data sheet: Recommendations Failing to follow these instructions can result in the actuator suffering damage or being...

Technical specifications

LA12 Dimensions Shows with piston rod eye option 1 and back fixture option 1 LA12 Back fixture orientation The Piston Rod Eye is only allowed to turn 0 - 90 degrees. Cable dimensions

Piston rod eyes: Option 02 03 Pistion 031923 with bushings, Stainless steel AISI 303 Piston 0301244 wit bushings, Stainless steel AISI 304 The Piston Rod Eye is only allowed to turn 0 - 90 degrees. Stainless steel (AISI 304) / 012114 3 position 01 2 Stainless steel (AISI 304) / 012114 position 02 Aluminium / 012095 position 01 Aluminium / 012095 position 02 10.17 0.15 Stainless steel AISI 304 Color: WE IMPROVE YOUR LIFE Producer: Format: Sheet: Volume: 7829 mm³ Scale: A4 1/1 2:1 General Tolerance: DS/ISO 2768-mH D General Surface Character: Ra 3.2 Material: Jannie Sølyst Jansen Jannie...

Speed and current curves - 12V motor: The below values are typical values made with a stable power supply and an ambient temperature of 20" C. Thrust (N) LAI 2 - 12V Current v's Thrust Page 8 of 20

Speed and current curves - 24V motor: The below values are typical values made with a stable power supply and an ambient temperature of 20" C.

I/O specifications: Actuator without feedback

I/O specifications: Actuator with absolute positioning - Mechanical potentiometer feedback

I/O specifications: Actuator with absolute positioning - Analogue feedback

I/O specifications: Actuator with Reed - Relative positioning 4 wires

I/O specifications: Actuator with IC (no EOS out)

I/O specifications: Actuator with IC and endstop signals

Environmental tests - Climatic

Environmental tests - Electrical All electrical tests are conducted and radiated emission (EMC) tests. Copyright© LINAK 2018.06 . MA M9-02-030-D . Chapter 5.1 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said...