Built-in actuator DB14 Data sheet

The DB14 DESKLINE Built-in actuator sets the standards for inline actuators. The DB14 is specially designed for integration in a customised 3-part column, to achieve the optimum freedom of design for various desk applications. The compact design was developed to fulfil the market requirements for a low built-in dimension and at the same time a long stroke length. Furthermore, the compact design enables a very slim guidance design. The DB14 system is controlled by the DESKLINE® control box CBD6S which ensures optimal parallel drive and a pleasantly low noise level. The DB14 can be used as a single...

Technical specifications: The following specification and curves applies for a DB14 mounted in a profile, like a DL, with max. 250N friction. Duty cycle (%) Nominal length 508 3mm Minimum length retracted at max. load 503 40 35 30 25 20 15 10 * For drawings of the earlier versions, contact the DESKLINE® Technical Support. 5 0 0 200 400 600 800 Performance curve: [N] 2 x DB14 (equally loaded) with CBD6S The 40 above curve applies to a centrally placed load. With moment load there will be an increased friction in the columns, which will reduce the lifting force correspondingly. 35 30 25 aware that...

Installation dim. Stroke length: Motor type: Standard: Standard: Standard: Cable: Spindle type: Actuator type: 508 = 508 mm 660 = 660 mm F = Standard with IID 0 = Standard 0 = Standard 0 = Standard 0 = 200 mm 0 = 2 x 10 mm pitch DB14 Please order in quantities divisible by the bulk size. Minimum order quantity equals bulk size. Copyright © LINAK 2019.06 . MA M9-02-291-E . Chapter 6.10.1 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However,...