ACTUATOR LA28 COMPACT Features and options: • 12V / 24V DC permanent magnet motor • Thrust up to 3500 N (with strong motor) • Stainless steel piston rod • Elegant and compact design with small installation dimensions • Colour: black • Low noise level • Available with extra powerful motor (strong motor), increases speed and strength • Brake - increase self-locking ability for LA28C actuators with 4, 6, 9 or 12 mm pitch with or without strong motor • Reed-switch (LA28C = 8 pulses/spindle rev. and LA28C with strong motor = 6 pulses/Spindle rev.) • Splines function (the actuator can only push) • Safety nut in push direction only • 0.2 m and 0.4 m coiled cable • Motor and terminal cover • Metal back fixture • Protection class IPX6 Usage: • Duty cycle: Max 10 % or max. 2 min. continuous use followed by 18 min. not in use • Ambient temperatures: +5° to +40°C • Compatibility: CB8, CB12, CB14 and CBJ • Approvals: IEC 60601-1:2005, 3rd edition, ANSI / AAMI ES60601-1:2005, 3rd edition and CAN / CSA-22.2 No 60601-1:2008 approved The LA28 Compact is a small and powerful actuator designed for use in system solutions for healthcare equipment or industrial applications. Ideal applications are for example wheelchairs, treatment chairs, patient lifts or beds. Some benefits of the LA28 compact are: • Compact design and small installation dimensions • Metal back fixture makes the actuator capable of withstanding high static pull force and ensures high safety • Quiet operation • 3500N in push (with strong motor) and 2000N in pull • Options such as spline and safety nut to ensure safe operation at all times.

Technical specifications: LA28 Compact with standard motor Order number *Self-lock max. (N) Pull Plastic/Alu Typical speed (mm/s) Load no Standard stroke lengths (mm) In steps of 50 mm LA28 Compact with “S” motor Order number *Self-lock max. (N) Pull Plastic / Alu Typical speed (mm/s) Load Standard stroke lengths (mm) In steps of 50 mm *Self-lock max. (N) Pull Plastic / Alu LA28 Compact with 12V motor Order number Typical speed (mm/s) Load No Standard stroke lengths (mm) In steps of 50 mm Above data: the measurements are made with the actuators connected to a stable power supply. A reed-switch...

Jack cables 0 = Straight 2.3 m 1 = Straight 1.05 m 2 = Coiled 0.4 m 3 = Coiled 0.2 m 4 = Cable without plug 1.5 m 5 = Cable without plug 1.0 m 6 = 7 cm leads with spade connectors only available without reed X = Other cable/Length 2 = IPX6 3 = IPXX (without cover) 4 = IP20 (with cover) Motor type: Stroke length: 0 = Standard (S + 156 mm) X = Other inst. dimension 1 = Safety nut RECOMMENDED 4 = Brake 0 = None 5 = Brake with safety nut 2 = Steel Splines 3 = Steel Splines with safety nut Option: (Motor position) A = 0 B = 30 C = 60 D = 90 O Max. with 2, 2.5, 3, 4 and 6 mm pitch: 400 mm Max. with...

Dimensions: LA28 Compact without cover. Back fixture fixture 01 Back 01 Back fixture Back fixture 02 02 Drawing no. 028744

LA28 Compact with cover LA28 Compact with IPX6 housing Installation dimensions: S + 156: LA28 Compact (with or without safety nut), minimum inst. dim. 256 mm. S + 167: LA28 Compact with splines, minimum inst. dim. 267 mm. S + 181: LA28 Compact with safety nut and splines, minimum inst. dim. 281 mm. S + 188: LA28 Compact with brake, minimum inst. dim. 288 mm. Note: The above data is with at stroke length of 100 mm. In certain circumstances a stroke length of less than 100 mm is possible please contact LINAK A/S. Compatible control boxes: CB8 LA28 with standard motor LA28 with strong motor

Copyright © LINAK 2015.01 . MA M9-02-117-K . Chapter 5.5.1 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same...