LD72M Miniature Low Glare LED Downlight Data sheet - Page 1 The new LD72M is 2mm smaller in diameter than the LD72 it replaces. It is a miniature LED downlight, ideal for display, niches or general downlighting effects. It is very discreet with the LED set back by 10mm to reduce glare, and a painted bezel which can be matched to the mounting surface. It utilises the latest LED technology with a typical CRI of 93 in warm white. IP40 as standard, but can be specified IP54 for bathrooms or wet environments. Key Features Very minimal depth and bezel diameter High power for its size High efficiency optics specially designed for LightGraphix guarantee excellent beam spread and shape Recessed LED position for reduced glare Optional IP54 version for wet areas, comes with glass and gasket Hidden fixing options include spring clips Simple and fast installation Available with Switch, 0-10V, DMX, Dali or Mains dimmable drivers Specification Applications LED type 1 x C1 Engine with NICHIA LED Anodised & painted aluminium body, bezel 1.2mm thick borosilicate (IP54 version only) Comes pre-wired with 2x 200mm single core lead, can be specified with up to 3m of single core cable at extra cost IP40 standard (optional IP54) Data sheet issued: 16 June 2023 LightGraphix reserve the right to change specifications without notice

Miniature Low Glare LED Downlight Data sheet - Page 2 Dimensions and Fixing Options Photometrics Photometric files are included in the design pack which can be downloaded from the LD72M product page on the website. Order Codes and Options LED and optic position recessed by 10mm for reduced glare. /IP54 version supplied with extra gaskets /IP54 version supplied with extrabetween gasketsthe bezel and mounting Product code surfaceØ28 Ø36 Ø36 between the bezel and mounting Ø28 Ø32 surface Cut-out Beam angle 39 Min Example: LD72M-C1-700 / LW30 / MB / IP54 / White Recess Product codes with output options...