LighhGraphix Creative Lighting Solutions COMPACT EXTERIOR RECESSED LED UPLIGHT The LD141 has been designed for exterior applications and can be specified as an uplight (LD141X) or wall light (LD141Y). Compact in size, the fittings offer a powerful output with a large range of features. There are 2 LED engine options available. The E3 engine delivers a high output of 567 lumens and beam angles ranging from a 12° narrow to a 15° x 49° extra oval beam, whilst the F1 engine offers a super warm colour temperature of 2200K. Both configurations offer the ability to specify a 20° tilt film to angle the light down onto the lit surface for a more concentrated effect. Designed with a repairable light engine, glare and fixing accessories, the LD141 offers a circular, low glare, solution for a range of exterior rated applications. KEY FEATURES DIMENSIONS Dimensions in mm > High-power E3 engine with NICHIA LED delivering up to 567lm at 700mA > F1 LED engine with CREE COB with super warm 2200K option > For exterior uplight (LD141X) or wall light (LD141Y) applications > Range of beam angles including 12°, 19°, 34°, 54°, 15° x 49° > Optional 20° tilt film angles the light onto the lit surface for a concentrated effect > Wide range of high-quality machined metal, painted wet spray and powder coated bezel finishes available, including: 316 Stainless Steel, Polished & Passivated 316 Stainless Steel, Brass, White (RAL 9016), Black (RAL 9005), Classic Bronze (YM262E), Gunmetal Grey (RAL 7021), Textured Mars Bronze, Textured Fir Green (RAL 6009) or any RAL colour > Optional glare shield and honeycomb louvre for further glare reduction > Fixing options include spring clips or /480 first fix sleeve with O-rings, concrete housing and ground tube For fixing dimensions please go to page 4. Contains our integral moisture guard (anti-wicking barrier), stopping water ingress from going up the cable into the product from incorrect IP-rated connections > Switched, 0-10V, Casambi, DMX, DALI or Mains dimmable drivers available T: +44 (0)1322 527 629 E: [email protected] www.lightgraphix.co.uk Page 1 of 7 | Data sheet issued: 23 June 2025

Creative Lighting Solutions WHITE LED ENGINE SPECIFICATION Page 2 of 7 | Data sheet issued: 23 June 2025

Creative Lighting Solutions AVAILABLE FINISHES Please refer to our finishes guide for full details 316 STAINLESS STEEL POLISHED & PASSIVATED316 STAINLESS STEEL > Marine grade 316 Stainless Steel > Standard machined finish > Extremely durable with high corrosion resistance > Passivation recommended for marine environments to prevent corrosion and build up of brown stains caused by oxidation > Marine Grade 316 Stainless Steel > Pristine mirror like finish > Recommended for pools and marine applications > Extremely durable with very high corrosion resistance > Passivated to extensively prolong resistance...

LD141X DIMENSIONS AND FIXING ACCESSORIES /SC Sping clips Suitable for use in surfaces with a thickness of 1mm – 25mm. Spring clips provide a simple, single fix mounting method. We recommend that spring clips are only used in interior applications. Weight: 0.05kg /441S First Fix Sleeve The fitting is supplied as standard with a fixing sleeve; this is bonded into the mounting surface first. The LD141 is secured into the sleeve by 2 ‘O’ rings on the body. When pushed into the sleeve it creates a watertight seal. Weight: 0.18kg Ø64 Ø64 /441N or /441N-2 Concrete housing LD141X-/441N & /441N-2 Must...

LD141X LIGHT OUTPUT OPTIONS LD141X tilt lens The addition of a 20° tilt film focuses the light towards the lit surface for a more concentrated effect. Ideal for discreet lighting applications where a throw of light is not required. LD141X-/441 with tilt lens Without tilt lens With tilt lens GLARE CONTROL OPTIONS /NGS No glare shield. Deep recessed optic and matt black anodised optic holder aids in glare reduction. T: +44 (0)1322 527 629 E: [email protected] Page 5 of 7 | Data sheet issued: 23 June 2025 /GSHM For applications that require low glare. Lumen output is typically reduced by...

LD141X CONE DIAGRAMS E3 LED Engine Cone diagrams below are based on a 3000K E3 LED engine run at maximum output 500mA, 7W. Images below represents beam outputs when wall washing a 3m wall, spaced 125mm away from the lit surface. Photometric files (LDT) are included in the design pack which can be downloaded from the LD141 product page on the website. (m)Luminance Luminance Distance (m)Luminance Luminance Distance (m) Luminance Distance (m)Luminance Luminance Distance (m)Luminance Luminance Distance (m) Luminance (lx) Distance Distance (m) Distance (m) Luminance (lx) Distance (lx) (m) (lx) Luminance...

Creative Lighting Solutions ORDER CODES & OPTIONS Example: LD141X-E3-500/LW30/ EOB/L / GSHM /316 STAINLESS STEEL/44IS Light Engine & Drive Current LED Colour Beam Angle Optical option Glare shield Flamed Solid Bronze Use with 350mA, 500mA and 700mA constant current LED drivers We have a range of dimmable LED drivers including DMX and DALI compatible. Please see the downloads section on our website. Page 7 of 7 | Data sheet issued: 23 June 2025